|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-12-2011, 02:33 PM | #1 |
Not Yet Wild
Join Date: Aug 2010
Posts: 4
|
Need instructions on to install rack and pinion kit
I have searched and could have missed it, but I just bought the rebuild kit for my 97 TXT with no left turning. I know from reading it is likely the rack and pinion so I ordered the kit. Do I need to remove the box to install this or can I do it on the cart? Any instructions would be greatly appreciated.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-12-2011, 05:17 PM | #2 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,283
|
Re: Need instructions on to install rack and pinion kit
You need to remove the steering box to replace the parts inside it. Also, the steering wheel and steering column must be removed. It's pretty straight forward. I have some pix somewhere....
BTW, WELCOME TO BGW! |
05-12-2011, 06:14 PM | #3 |
Not Yet Wild
Join Date: Aug 2010
Posts: 4
|
Re: Need instructions on to install rack and pinion kit
I got the box off, removed the long gear from the box and that is definitely where the problem is. I am going to attempt to put it back together tomorrow. thanks for the reply.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
rack & pinion power steering install picture | Gas EZGO | |||
8.5" rack and pinion???? | Lifted Golf Carts | |||
Rack & Pinion | Lifted Golf Carts | |||
Rack & Pinion Unit | Electric EZGO | |||
Rack and Pinion Rebuild | Electric EZGO |