06-16-2011, 07:32 PM | #1 |
Not Yet Wild
Join Date: May 2011
Location: pennsylvania
Posts: 4
|
Broken muffler on 2PG
Hi, I'm new to this site and have a question. I just got a 1985 EZGO with a Robins two stroke, my question is the inlet into the muffler is broken and the muffler is all rusted so I need a new one. My inlet goes into the top of the muffler and all the ones I'm finding for these years go in through the side is this a new design or am I just not finding the right one? Thanks for your help in advance.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-16-2011, 08:13 PM | #2 |
Hammer Down !!!!
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
|
Re: Broken muffler on 2PG
they changed the muffler design when they did away with the 2PG motor and went to the 3PG (both 2-strokes) however I believe that was in mid-88 (I have an 88 with the inlet on top also, and yes, it's difficult to find them, even a search for a 1988 muffler generally gave me the side-inlet design, too) ... Keep looking, they're out there
|
06-16-2011, 08:16 PM | #3 |
Hammer Down !!!!
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
|
Re: Broken muffler on 2PG
This is the style I have - does it look familiar?
They have almost all of the available 2-stroke mufflers, possibly you could snap a pic and email them, their tech support is pretty decent at helping out |
06-16-2011, 08:24 PM | #4 |
Not Yet Wild
Join Date: May 2011
Location: pennsylvania
Posts: 4
|
Re: Broken muffler on 2PG
Yeah that looks like the one.
|
06-17-2011, 01:22 AM | #5 |
Gone Wild
Join Date: Oct 2009
Location: Manitoba, Canada
Posts: 363
|
Re: Broken muffler on 2PG
If it's not broken completely, you could always try muffler tape or muffler putty.
If you think your muffler is rusty now, try BBQing it! |
06-17-2011, 06:03 AM | #6 |
Not Yet Wild
Join Date: May 2011
Location: pennsylvania
Posts: 4
|
Re: Broken muffler on 2PG
It's not rusted out or anything but the insides are
Loose so I don't think it's worth repairing. Where we Use it it needs to be somewhat quiet. |
06-17-2011, 06:45 AM | #7 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: Broken muffler on 2PG
welcome......good luck finding it the mufflar that is.......................
|
06-17-2011, 07:19 AM | #8 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: Broken muffler on 2PG
ebay type in ezgo muffler $159.00 not cheap
|
06-17-2011, 07:24 AM | #9 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: Broken muffler on 2PG
Sorry but I may also note my muffler is loose on the inside and also has been repair welded and isn't to loud so if you can live with it I would have it repaired. I own a welding shop and would think you should be able to have it repaired for about $20.00 if you can live with that.
|
06-17-2011, 12:47 PM | #10 |
Not Yet Wild
Join Date: May 2011
Location: pennsylvania
Posts: 4
|
Re: Broken muffler on 2PG
That's what I was thinking of doing, it's easy enough to just weld. I was just worried about the backpressure and noise with the insides being loose.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
broken rod | Gas Club Car | |||
Broken weld | Electric Club Car | |||
Broken wires?? | Gas EZGO | |||
Help My carts broken!!!! | Gas Yamaha |