|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-18-2011, 07:47 AM | #1 |
Getting Wild
Join Date: Jun 2010
Location: Occupied South
Posts: 143
|
I need a front spring, and don't have year/ model info.
I broke a front spring (4 beers down with Wango Tango at full volume, jumping a berm) the problem is; I have no indication what model year this thing is, and therefore which spring to buy.
How do I figure out which spring is the right one? I'm going to load it up and bring it home, after a much needed breakfast; so I'll be able to measure, take pics, etc. This needs to get sorted out by Monday morning because I've got this buggy lined up for more beatings next weekend. I'll be keeping a close eye on this thread and getting responses back ASAP, so if you have some input, hold on, I'll be right back. The cooler & beverages were unharmed in the incident. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-18-2011, 07:53 AM | #2 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: I need a front spring, and don't have year/ model info.
some pics would help
|
09-18-2011, 07:53 AM | #3 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: I need a front spring, and don't have year/ model info.
look here this will help you figure out the year
http://www.shopezgo.com/customer-ser...ialNumber.html |
09-18-2011, 07:54 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: I need a front spring, and don't have year/ model info.
Post a pic of the cart and the measurement of the spring. Measure from center of hole to hole
|
09-18-2011, 07:58 AM | #5 |
Getting Wild
Join Date: Jun 2010
Location: Occupied South
Posts: 143
|
Re: I need a front spring, and don't have year/ model info.
Here's a little bit to start on.
The springs just have a simple arc. No funny bends at the ends. The steering is set up with the rack mounted to the body up high, then to a pivot that goes down to spring level, then to a drag link. The cart had a coil spring rear suspension. 295 four stroke. |
09-18-2011, 08:02 AM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: I need a front spring, and don't have year/ model info.
Ezgo Made a bunch of different springs ~ Just post the measurement from the hole centers farthest apart.
|
09-18-2011, 08:05 AM | #7 |
Getting Wild
Join Date: Jun 2010
Location: Occupied South
Posts: 143
|
Re: I need a front spring, and don't have year/ model info.
No #'s whatsoever on this cart.
No original body. The only EZ GO is from the spring mounts foward & swingarm bolts back. I'll get some good pics when I get it back home |
09-18-2011, 10:59 AM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: I need a front spring, and don't have year/ model info.
|
09-18-2011, 11:00 AM | #9 |
Getting Wild
Join Date: Jun 2010
Location: Occupied South
Posts: 143
|
Re: I need a front spring, and don't have year/ model info.
Is there a measurement I can use without taking the spring out? |
09-18-2011, 11:35 AM | #10 |
Getting Wild
Join Date: Jun 2010
Location: Occupied South
Posts: 143
|
Re: I need a front spring, and don't have year/ model info.
15 1/8" - 15 1/2" hole to hole. Depending on measuring inside or outside of arc. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Is there a page that gives a break down by year and model for wiki type info? | Electric EZGO | |||
What year/make/model solid front axle for disk brakes? | Design Center | |||
ID Info needed YR / Model | Gas EZGO | |||
Gurus, Looking for info on spring only lift for 2KPDS | Lifted Golf Carts | |||
Info on cart model and year | Electric EZGO |