|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-05-2011, 10:05 AM | #1 |
Gone Wild
Join Date: Oct 2008
Location: Greece, NY
Posts: 595
|
Steering linkage help needed
Just lifted my 83 gaser with a 5" kit from ATV Expert (eBay). Took it out for its maiden voyage and found the steering linkage is binding when turning right. Looks like there's too much angle in the steering link to allow free movement. Anyone have any solutions to this problem? Thanks in advance!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-05-2011, 01:52 PM | #2 |
no clue
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: Steering linkage help needed
do you have any pics so we can see what you are using?
|
11-05-2011, 04:26 PM | #3 |
Gone Wild
Join Date: Oct 2008
Location: Greece, NY
Posts: 595
|
Re: Steering linkage help needed
Here are some pix. I'm not sure of the correct terminology, so I labeled one. I think the problem is the steering link being at too steep of an angle. If I put the steering link through the top of the steering arm, I think it would work. But the hole in the steering arm is tapered from the bottom up. I was wondering if anyone has run into this problem. If so, what did they do about it. Thanks.
|
11-06-2011, 12:01 PM | #4 |
Gone Wild
Join Date: Oct 2008
Location: Greece, NY
Posts: 595
|
Re: Steering linkage help needed
I was thinking of drilling out the steering arm to accept the steering link from the top. I would lose the taper in the hole.....would that be a problem? I would think it would "wobble" when steering, but I'm not sure. Anyone have any advice? Thanks!
|
11-06-2011, 05:26 PM | #5 |
Gone Wild
Join Date: Oct 2008
Location: Greece, NY
Posts: 595
|
Re: Steering linkage help needed
Anyone?
|
11-07-2011, 04:58 PM | #6 |
Gone Wild
Join Date: Feb 2010
Location: Toledo.Ohio
Posts: 531
|
Re: Steering linkage help needed
I dont know what size but you have to drill out the hole for the tie rod and flip the tie rod over. Just the one end.
|
11-07-2011, 05:37 PM | #7 |
Gone Wild
Join Date: Oct 2008
Location: Greece, NY
Posts: 595
|
Re: Steering linkage help needed
|
11-07-2011, 05:45 PM | #8 |
Gone Wild
Join Date: Feb 2010
Location: Toledo.Ohio
Posts: 531
|
Re: Steering linkage help needed
yes, you dont want to drill it out to big.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Loose Steering In 1998 Series TXT w/ Frame Mounted Steering | Electric EZGO | |||
Install 6" all sport lift kit trouble install steering linkage | Lifted Golf Carts | |||
2K PDS cart old style steering diagram needed | Electric EZGO | |||
Needed Steering box | Golf Carts and Parts |