|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-27-2012, 04:57 PM | #1 |
Gone Wild
Join Date: May 2011
Location: Oklahoma City
Posts: 204
|
I need crank and balancer shaft spacers
I'm building a ezgo, robin 352 eng from two broken ones and have everything I need except the crankshaft and ballencer shaft spacers, the ones I have are too thick, and the book says you need to be within.003 to .015 to be right. The one I need for the crankshaft is between .006 to .018, and for the ballencer is between .003 to .015. Any help would be nice. Thank You
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-27-2012, 11:14 PM | #2 |
Gone Wild
Join Date: May 2011
Location: Oklahoma City
Posts: 204
|
Re: I need crank and balancer shaft spacers
I've double checked all this site's sponcers, EBay, the local EZGO dealer and no one has these spacers,,, Can anyone give me a clue on a place to get them, or have them, these are small and would fit in a envelope thru the mail. |
01-29-2012, 04:35 PM | #3 |
Gone Wild
Join Date: May 2011
Location: Oklahoma City
Posts: 204
|
Re: I need crank and balancer shaft spacers
For those of you that are into metric,,, the spacers I need are between
0.1mm to 0.4mm on the crankshaft, 0.2mm to 0.4mm on the ballancer the smallest that shopezgo has on there website are 0.6 |
|
|
Similar Threads | ||||
Thread | Forum | |||
Jakes 2" billet wheel spacers & stud spacers | Golf Carts and Parts | |||
distance between crank and trans shaft 94 gas cc | Gas Club Car | |||
aligment of cam shaft, crank, and crank balance on g14 | Gas Yamaha | |||
I need a g9 crank shaft really bad | Golf Carts and Parts | |||
2 stroke crank shaft wanted ezgo | Golf Carts and Parts |