Marathon Leaf Spings

dannyferris

Hello fellow cart enthusiests, I am looking for a set of rear leaf springs for my ezgo marathon and a friend has a set but not sure what cart they fit. Can anyone tell me what the hole to hole dimensions are and what hole size should be so I can tell if these will fit my Marathon? Any Info on this subject would be greatly appreciated

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

racin161

What year cart are you working on is it gas or electric? The reason I ask is the gas marathons I have are coil spring rears I also had an electric which was leaf so give us more info and I'm sure someone can help OK WELCOME to BGW

LOU

dannyferris

1991 Electric marathon

pachanga90

Electric Marathons all run Leafs,Gassers run coil-springs.Measure the width and overall length of the leafs,also measure from the center-bolt to each end.Always measure along the leaf,not from point to point.If you need to beef yours up,you could add a leaf from the other packs you have,you will only need 2 new Center-Bolts and new U-Bolts.For extra-weight,use the main-leaf,torch-cut the eyes off,grind a bevel on the edge so that its' rounded,and install it under the existing main-leaf.For just a little extra help,and ride-height increase,add a shorter leaf lower in the pack.I work in a spring-shop,this is daily stuff for me.Hope this helps.