|
|||||||
| Notices |
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
#1 |
|
Not Yet Wild
Join Date: Jun 2008
Posts: 9
|
Is there a way to control a relay from the key switch. Thought I had it last night but the starter kept running until I turned the key off.
Want the radio and lights to go off when the key is off. |
|
|
|
|
|
|
|
|
#2 |
|
Not Yet Wild
Join Date: May 2008
Posts: 40
|
Intersting that you asked this because I recently did this mod on a V-Twin set-up, since I had to replace the whole electrical system. There are two things you can do:
1. Hook up your additional accesories to the solenoid (second best, don't really recommend), or 2. Use the solenoid as the 'trigger' for the relay (hook up a cable from the + switched terminal on top of the Solenoid to the relay. Use a voltmeter or some kind of tester to test this. Then hook up your battery and the rest of the accesories to the relay (best)... use a truck relay rated 20 amps or better. Not more than $5 at you local car shop. Keep us posted... |
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| looking for relay | Gas Yamaha | |||
| Key switch & Kill switch question | Gas Club Car | |||
| Czonka relay and protective diode | Extreme DC! | |||
| 16v on 12v car relay | Extreme DC! | |||
| Czonka Relay EV200 | Extreme DC! | |||