09-25-2012, 05:07 PM | #1 |
Not Yet Wild
Join Date: Apr 2011
Posts: 14
|
engine clutch removal
I got the clutch loose from the crank, but it wont clear the axle. do I have to unbolt the whole axle or the motor? any tips appreciated.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-25-2012, 05:59 PM | #2 |
Gone Wild
Join Date: Sep 2012
Location: Michigan
Posts: 351
|
Re: engine clutch removal
what cart do you have??
|
09-25-2012, 07:36 PM | #3 |
Not Yet Wild
Join Date: Apr 2011
Posts: 14
|
Re: engine clutch removal
1983 ez go gas
|
09-25-2012, 08:10 PM | #4 |
Gone Wild
Join Date: Mar 2012
Location: spokane,wa
Posts: 974
|
i think if you unbolted the two pass side motor mounts and lifted the motor up a little you should be able to get it out.
Sent from my LG-P999 using Tapatalk 2 |
09-26-2012, 04:01 AM | #5 |
Gone Wild
Join Date: Sep 2012
Location: Michigan
Posts: 351
|
Re: engine clutch removal
I agree with 1fast
|
09-26-2012, 08:34 AM | #6 |
Respect the Cart
Join Date: May 2010
Location: Rocky Mount, Virginia
Posts: 2,190
|
Re: engine clutch removal
That is how I did mine although I undid just the one engine frame mount accessible by removing the passenger rear wheel. Then with a jack on the engine frame I was able to raise the engine until the clutch cleared the axle.
Dave |
09-26-2012, 09:06 AM | #7 |
Gone Wild
Join Date: Mar 2012
Location: spokane,wa
Posts: 974
|
i couldnt remember if you had to undo one or two of the mounts.
Sent from my LG-P999 using Tapatalk 2 |
09-26-2012, 01:09 PM | #8 |
Not Yet Wild
Join Date: Aug 2012
Posts: 57
|
Re: engine clutch removal
I took the passenger side bolt out on the motor cradle and the front one out too. Jacked the cradle up with a floor jack from the passenger side till the muffler can was against the heat shield for the fuel tank. This let me get the clutch back far enough to get past the crank snout then was easier to go down under the axle. 9/16th wrench to let off the pressure on the generator/starter belt.
Cheers Don. |
09-26-2012, 05:09 PM | #9 |
Not Yet Wild
Join Date: Apr 2011
Posts: 14
|
Re: engine clutch removal
thanks to all , got it out!!
|
09-26-2012, 07:06 PM | #10 |
Gone Wild
Join Date: Mar 2012
Location: spokane,wa
Posts: 974
|
glad we could help.
Sent from my LG-P999 using Tapatalk 2 |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Engine/clutch removal 295, 350 | Gas EZGO | |||
Tips & Hints for installing Clutch Tuning Kit, Removal of Drive Clutch | Gas Club Car | |||
clutch removal | Gas Club Car | |||
engine removal...? | Gas Club Car |