lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 11-11-2012, 09:50 AM   #1
sassycat
Gone Wild
 
sassycat's Avatar
E-Z-GO
 
Join Date: Sep 2012
Location: bikini state
Posts: 2,715
Default ezgo me29 rear locker

i have a me29 rearend i will be swaping into my 85 marathon in do time and getting everything together ahead of time..
anyone use this locker before?
i was thinking the rearend i just got was the same thru 98 and up a few more yrs?
http://www. *************.com/produc...%20JL%20EZ4CYL

i was thinking my "94 model i think" 4 cycle rear is the same as this 98?
thanks..
sassycat is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 11-12-2012, 01:40 PM   #2
sassycat
Gone Wild
 
sassycat's Avatar
E-Z-GO
 
Join Date: Sep 2012
Location: bikini state
Posts: 2,715
Default Re: ezgo me29 rear locker

having no luck at all..guess i will keep my eye out for a 98 -o4 rear axle now.or weld the rear spiders..i have no problem doing so,just hate the thought that the very lil pavement driving will break the rear end..
anyone have good luch with welded rear? how many yrs you been runnin it?
sassycat is offline   Reply With Quote
Old 11-12-2012, 04:07 PM   #3
1fast67
Gone Wild
 
1fast67's Avatar
E-Z-GO
 
Join Date: Mar 2012
Location: spokane,wa
Posts: 974
Default

No lincoln locker sassy! You just might be stuck with an open diff. Just my 2 cents.

Sent from my LG-P999 using Tapatalk 2
1fast67 is offline   Reply With Quote
Old 11-12-2012, 04:14 PM   #4
sassycat
Gone Wild
 
sassycat's Avatar
E-Z-GO
 
Join Date: Sep 2012
Location: bikini state
Posts: 2,715
Default Re: ezgo me29 rear locker

just my luck
sassycat is offline   Reply With Quote
Old 11-12-2012, 04:23 PM   #5
1fast67
Gone Wild
 
1fast67's Avatar
E-Z-GO
 
Join Date: Mar 2012
Location: spokane,wa
Posts: 974
Default

You can call our sponsors and see if they even offer one for that rear end.

Sent from my LG-P999 using Tapatalk 2
1fast67 is offline   Reply With Quote
Old 11-12-2012, 06:44 PM   #6
sassycat
Gone Wild
 
sassycat's Avatar
E-Z-GO
 
Join Date: Sep 2012
Location: bikini state
Posts: 2,715
Default Re: ezgo me29 rear locker

good idea,,will call a couple tomorrow
sassycat is offline   Reply With Quote
Old 11-12-2012, 06:57 PM   #7
Slamminsam
Gone Wild
 
Slamminsam's Avatar
E-Z-GO
 
Join Date: Apr 2010
Location: Santaquin, Utah
Posts: 585
Default Re: ezgo me29 rear locker

I have that rear end in my 94 GXT-804. I havent tried sourcing a locker for it though.
let us know what you find out.
Slamminsam is offline   Reply With Quote
Old 03-27-2013, 05:13 PM   #8
sassycat
Gone Wild
 
sassycat's Avatar
E-Z-GO
 
Join Date: Sep 2012
Location: bikini state
Posts: 2,715
Default Re: ezgo me29 rear locker

found out the older me29 axles like mine from 94 have a smaller diff/spider gear cage that holds the ring gear..it can be changed with a 98? and up diff carrier thats bigger and it will accept the newer lockers then..not cheap tho unless you have a axle laying around
they bolt in and accept your ring gear just the same,just bigger on the inside where the spider gears go
sassycat is offline   Reply With Quote
Old 03-27-2013, 05:38 PM   #9
sonnyhooper
Getting Wild
E-Z-GO
 
Join Date: Aug 2012
Location: minnesota
Posts: 103
Default Re: ezgo me29 rear locker

So does the carrier come apart to get spider gears out. Why can't it be welded. If you removed the spiders couldn't they be welded on the bench then put back in?
sonnyhooper is offline   Reply With Quote
Old 03-27-2013, 06:36 PM   #10
sassycat
Gone Wild
 
sassycat's Avatar
E-Z-GO
 
Join Date: Sep 2012
Location: bikini state
Posts: 2,715
Default Re: ezgo me29 rear locker

have not took the carrier aprt yet..and mine looks solid with 2 small windows ,1 on each side where ive seen others weld them there also,but surley that cant be enough,,so,,
remove the carrier,remove ring gear,then theres a roll pin in a hole there under the ring gear that has to come out,then the cross shaft that holds in the spider gears will fall,or slide out.
like a car after the roll pin is out dont let the pin fall out as theres 4 spyder gears that are "supposed" to go back in the same spot,and if like a car theres cup washers under all the spider gears tht would be best to go back in the same positiong aslo.

i dont se how to weld it now,but i "assume" after removing the ring gear there will be enough room to weld it up..
its such a solid lil chunk of steel that the weak link it it all after welding the gears would kinda have to be the outter axle plines and shaft id think
sassycat is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
ME29 transaxle info Big Block Talk!
me29 transmission gasket Gas EZGO
ME29 won't go into forward Gas EZGO
G2 Rear End Locker Lifted Golf Carts
Rear locker for Club Car. Help Lifted Golf Carts


All times are GMT -5. The time now is 01:08 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.