|
|||||||
| Notices | |
|
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
  |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|||||||
| Notices | |
|
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
|
| |
|
|
Thread Tools | Search this Thread | Display Modes |
08-15-2008, 11:52 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2008
Location: Along I-80 in Westcentral Pennsylvannia 30 min above the place with the ground hog
Posts: 3
 |
I can't get any power
I bought a 1986 ezgo it has a 244cc robin two stroke and cytrifical clutch I ran it for about a month when its fourward speed power and motor smoothness declined quickly from a semi crappy state so i changed fuel filters and it ran a little better for about two days and now it has no forward power speed and no reverse. The motor will turn over ellectrily but it won't catch so i cleaned the points and now it will run like crazy in reverse but all it does is miss sputter and backfire in forward. it gets juice to everything coil, spark plug, are all good it is getting fuel and everything. i am decent with small moters but this really baffles me so i will take any advice. thanks all who help
|
|
|
|
|
|
|
08-16-2008, 12:28 PM
|
#2 |
|
The Welcome Guy
Join Date: Jan 2007
Location: Wichita Falls Texas - My Rides 1996 E-Z-GO and 2002 Club Car IQ and 2003 Club Car IQ
Posts: 2,547
|
Re: I can't get any power
Welcome to the forum Dairymanwardell...............
|
|
|
|
|
08-16-2008, 02:42 PM
|
#3 |
|
Getting Wild
Join Date: Apr 2008
Location: St. George, SC
Posts: 85
|
Re: I can't get any power
Do a thourough search of this forum....I recall seeing this problem before and there were some solutions posted although I don't remember what they were.
|
|
|
|
|
08-16-2008, 04:47 PM
|
#4 |
|
Not Yet Wild
Join Date: Aug 2008
Location: California
Posts: 37
|
Re: I can't get any power
Timing?
A little more info, it runs in reverse not in foward? Back firing/sputtering sounds like timing. Did you mess with the point and regap them? |
|
|
|
|
08-16-2008, 05:49 PM
|
#5 |
|
Not Yet Wild
Join Date: Aug 2008
Location: Along I-80 in Westcentral Pennsylvannia 30 min above the place with the ground hog
Posts: 3
|
Re: I can't get any power
i just cleaned the points but the screws were loose so i tighted them down so i might need to reset them is there measurements to set the points or do i got to do trial and error??? thanks for the help so far
|
|
|
|
|
08-16-2008, 08:21 PM
|
#6 |
|
Getting Wild
Join Date: Apr 2008
Location: St. George, SC
Posts: 85
|
Re: I can't get any power
I want to say that Ruredy was the one who had the answer on that problem but I am not sure. I will try to research the old posts and see if I can find it.
|
|
|
|
|
08-17-2008, 10:40 AM
|
#7 |
|
Gone Wild
Join Date: Nov 2007
Location: OKOBOJI, IA.
Posts: 172
|
Re: I can't get any power
set points at .015
 |
|
|
|
|
08-17-2008, 11:31 AM
|
#8 |
|
Born Wild
Join Date: Mar 2007
Location: South Carolina
Posts: 2,205
|
Re: I can't get any power
It sounds to me like the points are not on TDC and not set correctly.
|
|
|
|
|
08-22-2008, 10:30 AM
|
#9 |
|
Not Yet Wild
Join Date: Aug 2008
Location: Along I-80 in Westcentral Pennsylvannia 30 min above the place with the ground hog
Posts: 3
|
Re: I can't get any power
i tried setting the points andthey are throwing a double spark so i think they are burnt pretty bad i am goona take them out and file them or get new ones and how do set them to hit at tdc do you rotate them around the flywheel
|
|
|
|
|
| Tags |
| 1986, 244 robin, ezgo |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| low power | Electric Yamaha | |||
| 91 G9 has no power-HELP | Gas Yamaha | |||
| More power | Extreme DC! | |||
| no power | Gas EZGO | |||
| help no power | Electric Yamaha | |||
Linear Mode
