88 ez go 2 cycle

voltin · 08-19-2008, 02:29 PM

My ez go 2 cyc starts when the engine is cold.
It will also start during the first 30-60 sec after stopping when the engine is hot.
After the 30-60 sec, it will not restart. It appears that fuel from the fuel line leaks into the cylinder, causing flooding. In this case, it will restart in about an hour.
Is this a card prob or a fuel line problem??
Is there some online docs that go over this type of situation?

bustin-bs · 08-19-2008, 05:10 PM

Sounds like your float is stuck open and allowing fuel to flood the cyclinder.

sccowboy · 08-20-2008, 01:12 AM

Check your fuel pump 2 see if it is leaking fuel into the cylinder.

08-19-2008, 02:29 PM	#1
voltin Not Yet Wild Join Date: Aug 2008 Posts: 4	88 ez go 2 cycle My ez go 2 cyc starts when the engine is cold. It will also start during the first 30-60 sec after stopping when the engine is hot. After the 30-60 sec, it will not restart. It appears that fuel from the fuel line leaks into the cylinder, causing flooding. In this case, it will restart in about an hour. Is this a card prob or a fuel line problem?? Is there some online docs that go over this type of situation?
voltin Not Yet Wild Join Date: Aug 2008 Posts: 4

08-19-2008, 05:10 PM	#2
bustin-bs Not Yet Wild Join Date: Aug 2008 Location: California Posts: 37	Re: 88 ez go 2 cycle Sounds like your float is stuck open and allowing fuel to flood the cyclinder.

08-20-2008, 01:12 AM	#3
sccowboy Getting Wild Join Date: Apr 2008 Location: St. George, SC Posts: 85	Re: 88 ez go 2 cycle Check your fuel pump 2 see if it is leaking fuel into the cylinder.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Testing a 2 cycle ingiter	Gas EZGO
2000 4 cycle gas e-z-go	Gas EZGO
A way to remove governor on 4 cycle G2???	Gas Yamaha
1983 G1 2 cycle gas	Gas Yamaha
auto and cycle show	Events/Places to ride