Just bought an EZ GO need help

will · 08-30-2008, 02:46 PM

Hi all glad to have found you. I just bought a metal body four stroke (has valves) for a hundred bucks of craigslist. It runs real nice but it needs a drive belt and even with all of your posts about ID location I cant find one. I need to figure out what year it is so I can get the right belt.

Is there a way to measure for the right belt?

Will

GXTsandman · 08-30-2008, 04:51 PM

Post pictures. It should help

scottyb · 08-30-2008, 10:06 PM

I think there is an id tag in the glove box area? the last 2 digits of the manufacture code is the year & that should be enough, unless she's modified.

rusty · 08-30-2008, 10:30 PM

Welcome to the forum will.................

bustin-bs · 08-31-2008, 09:16 AM

Welcome to the board, chech the passanger side of the glove box for id tag..

Robertbrenner1 · 08-31-2008, 09:40 AM

Will, Do you have the old belt? or is it missing? There should be numbers on the belt, or your parts store can measure it.

rusty · 08-31-2008, 10:33 AM

Will........ The really older E-Z-GO's ID plates are under the seats, drivers side on the left rear wheel well in the battery compartment If you don't find it under the passenger glove box.

ruredy · 08-31-2008, 06:42 PM

If it's a 4 stroke then it should have a manufacturing code in or near the pass side glove box. post a pic if no number, then we can help.

rfquiggle · 06-24-2013, 10:31 PM

The identification tag should be on passanger sideunder glove box area or in it. Some of the 4 strokes have a tag right on the engine. The problem I see is I did not think any of the 4 strokes had metal bodies.

06-24-2013, 10:42 PM

i know us older members forget that newbees can't post photos

08-30-2008, 02:46 PM	#1
will Not Yet Wild Join Date: Aug 2008 Posts: 1	Just bought an EZ GO need help Hi all glad to have found you. I just bought a metal body four stroke (has valves) for a hundred bucks of craigslist. It runs real nice but it needs a drive belt and even with all of your posts about ID location I cant find one. I need to figure out what year it is so I can get the right belt. Is there a way to measure for the right belt? Will
will Not Yet Wild Join Date: Aug 2008 Posts: 1

08-30-2008, 04:51 PM	#2
GXTsandman Getting Wild Join Date: May 2008 Location: SouthWest US Posts: 122	Re: Just bought an EZ GO need help Post pictures. It should help

08-30-2008, 10:06 PM	#3
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: Just bought an EZ GO need help I think there is an id tag in the glove box area? the last 2 digits of the manufacture code is the year & that should be enough, unless she's modified.

08-30-2008, 10:30 PM	#4
rusty Golf Cart Photographer Join Date: Jan 2007 Location: Wichita Falls Texas - My Ride 2010 Club Car Posts: 6,236	Re: Just bought an EZ GO need help Welcome to the forum will.................

08-31-2008, 09:16 AM	#5
bustin-bs Getting Wild Join Date: Aug 2008 Location: California Posts: 109	Re: Just bought an EZ GO need help Welcome to the board, chech the passanger side of the glove box for id tag..

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

08-31-2008, 09:40 AM	#6
Robertbrenner1 Gone Wild Join Date: Aug 2008 Location: Melbourne Florida Posts: 170	Re: Just bought an EZ GO need help Will, Do you have the old belt? or is it missing? There should be numbers on the belt, or your parts store can measure it.

08-31-2008, 10:33 AM	#7
rusty Golf Cart Photographer Join Date: Jan 2007 Location: Wichita Falls Texas - My Ride 2010 Club Car Posts: 6,236	Re: Just bought an EZ GO need help Will........ The really older E-Z-GO's ID plates are under the seats, drivers side on the left rear wheel well in the battery compartment If you don't find it under the passenger glove box.

08-31-2008, 06:42 PM	#8
ruredy Born Wild Join Date: Mar 2007 Location: Clover SC. Posts: 5,552	Re: Just bought an EZ GO need help If it's a 4 stroke then it should have a manufacturing code in or near the pass side glove box. post a pic if no number, then we can help.

06-24-2013, 10:31 PM	#9
rfquiggle Not Yet Wild Join Date: Jun 2013 Posts: 48	Re: Just bought an EZ GO need help The identification tag should be on passanger sideunder glove box area or in it. Some of the 4 strokes have a tag right on the engine. The problem I see is I did not think any of the 4 strokes had metal bodies.
rfquiggle Not Yet Wild Join Date: Jun 2013 Posts: 48

06-24-2013, 10:42 PM	#10
crash test dummy Guest Posts: n/a	Re: Just bought an EZ GO need help i know us older members forget that newbees can't post photos
crash test dummy Guest Posts: n/a

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Just bought new everything, the EZ-GO still won't go!!!	Electric EZGO
NEW HERE JUST BOUGHT A 06 Precedent	Gas Club Car
I just bought this for my Workhorse	Big Block Talk!