mikuni 3v18

Ron Benedict

Does anyone know where I can find an air screw for the 3v18 carb? Thanks Ron

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Dave Box

Ron,
You can get a rebuild kit here,
http://www.vintagegolfcartparts.com/...&cat=ezgo_fuel
which includes the screw you need but at a cost. If you shop around you can find the complete BV 18 for around $100 and I came to the conclusion that this was a better option.
Incidentally if you look at an air flow map for the carburetor you will see that the low speed bypass screw is itself bypassed the moment you open the carburetor butterfly. The purpose of that screw is to adjust the slow running speed at idle which you don't care about. You could try capping the hole temporarily with some tape and seeing if the engine runs acceptably without the screw.

Dave

Ron Benedict

Thanks Dave. I will plug it and see what happens. Ron

Ron Benedict

That worked. Thanks Dave

Dave Box

The pleasure is all mine Ron, I'm glad that worked out for you.

Dave