|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-30-2013, 08:07 PM | #1 |
Not Yet Wild
Join Date: Jul 2013
Location: Michigan
Posts: 24
|
2004 Gas EZ Go throttle question?
Hello everyone! Due to all the great info. I've read so far on this site, I decided to join. I just bought a 2004 EZ GO TXT gas cart. Lifted, wheels, etc. Love it! My question, the throttle is annoying me. When I got it, my brother adjusted the throttle cable in the rear to give it more response and a touch quicker. After that, it ran great, fast, but backfired a lot when letting off the gas. Also smelled really rich. After reading on here, I see that the throttle plate in the carb may not be closing all the way. I adjusted the cable, plate closed, now the backfiring quit, but you have to push the pedal almost 1/2 way down to move and it starts to go, then hesitates, then takes off. Can I adjust the cable in the rear where I want it, then is there an adjustment on the carb to close up that plate? May be a dumb question, but I'm learning. Can't find a happy/medium in my adjustments. Any suggestions would be appreciated. Thanks!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-31-2013, 06:52 PM | #2 | |
Not Yet Wild
Join Date: Jul 2013
Posts: 6
|
Re: 2004 Gas EZ Go throttle question?
Quote:
|
|
08-01-2013, 08:28 AM | #3 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: 2004 Gas EZ Go throttle question?
You need to adjust the cable that goes to the rearend/governor, clockwise on the nuts to get the throttle to work closer to the top of the peddle.
Then if the throttle plate don't close all the way, pop off the little linkage at the carburetor and adjust a little longer, so it does close. |
08-01-2013, 05:16 PM | #4 |
Not Yet Wild
Join Date: Jul 2013
Location: Michigan
Posts: 24
|
Re: 2004 Gas EZ Go throttle question?
Thanks for the response. This linkage that you are talking about, is it under the metal plate that is riveted on over top of the carb? Because I don't see anything connected to the visible side of of the carb.
|
08-01-2013, 07:24 PM | #5 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: 2004 Gas EZ Go throttle question?
Sorry CT, I'm familiar with my 2000 and 2001 I have. I just went and looked at an 05 that I just bought and it's a whole different deal. Must have changed with the MCI thing, I don't even see linkage going from the governor to the carburetor on it and it's probably like yours.
Hope someone can help. |
08-01-2013, 10:27 PM | #6 |
Not Yet Wild
Join Date: Jul 2013
Location: Michigan
Posts: 24
|
Re: 2004 Gas EZ Go throttle question?
Hey, no problem. Yeah, hoping somebody can give me some ideas. It's so annoying. Thanks again.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2004 precedent charger question | Electric Club Car | |||
Throttle box question | Electric EZGO | |||
Throttle Question | Electric EZGO | |||
question about lift kit on 2004 ezgo | Electric EZGO | |||
2004 DS Throttle Adjustment | Electric Club Car |