|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-10-2013, 07:58 AM | #1 |
Not Yet Wild
Join Date: Mar 2013
Location: Cary NC
Posts: 6
|
Wiring Turn Signal/Flasher Unit into Lighting Harness
Hello All, This is my first post but I have been a member for several months and have found some really great information.. Thanks..!!
I am rebuilding a 1998 GAS EZGO TXT which has been going really great except for this issue.. I have installed a premium light kit from Buggies Unlimited which includes the blinker/flasher assembly that mounts to the steering column.. I have the light kit hooked up and wired but I can not determine how to wire the blinker/flasher assembly into the harness to make every work.. I have the flasher tied in but can only get the rear lights to flash and I can not figure out how to get the front lights to flash and I can not figure out how to wire in the rest of the wiring from the blinker assembly to make the front and rear blinkers work.. I am sure a lot of you have gone through this but all the docs I have been able to find do not clearly explain how to wire the blinker/flasher assembly into the main wiring harness.. Thanks in advance for any help you can provide.. Mark Picciano Oak Island NC |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-10-2013, 09:20 AM | #2 |
Getting Wild
Join Date: Oct 2013
Location: Clinton,TN
Posts: 110
|
Re: Wiring Turn Signal/Flasher Unit into Lighting Harness
here is the diagram I used when I fixed the turn signals on my 98 workhorse. yours will be the same.
|
12-10-2013, 03:24 PM | #3 |
Not Yet Wild
Join Date: Mar 2013
Location: Cary NC
Posts: 6
|
Re: Wiring Turn Signal/Flasher Unit into Lighting Harness
Thank you very much.. this is much more detailed than anything else I have been able to find
|
12-18-2013, 10:31 AM | #4 |
Not Yet Wild
Join Date: Mar 2013
Location: Cary NC
Posts: 6
|
Re: Wiring Turn Signal/Flasher Unit into Lighting Harness
Thanks for the diagram but I have one more question, exactly where do I break into the wiring harness to tied in the wires from the blinker/flasher assembly.. Do I cut into the harness wire or wire the blinker/flasher wires to the actual lights.. Also, how do I get the lights on the actual blinker/flasher to work, they don't seem to light up no matter what I try.. Thanks so much for the help..!
|
12-19-2013, 03:18 PM | #5 |
Getting Wild
Join Date: Oct 2013
Location: Clinton,TN
Posts: 110
|
Re: Wiring Turn Signal/Flasher Unit into Lighting Harness
it shows the hot from fuse block to one side of the flasher and the other side of flasher will be the hot going to the turn signal switch
|
01-18-2014, 04:00 PM | #6 |
Not Yet Wild
Join Date: Oct 2012
Posts: 8
|
Re: Wiring Turn Signal/Flasher Unit into Lighting Harness
I just finished re wiring my entire '98 EZGO TXT. The attached diagram should get it for you. I ran separate/individual wires to the the front turn signal lights. I did not use the wire harness wires. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Turn signal flasher | Gas Yamaha | |||
LED turn signal flasher unit | Electric Club Car | |||
Wiring precedent turn signal into 1998 DS harness (gettin' horn) | Electric Club Car | |||
Wiring in a turn signal/flasher/brake switch. | Electric EZGO |