10-20-2008, 04:11 PM | #1 |
Not Yet Wild
Join Date: Oct 2008
Location: Pa
Posts: 5
|
Robin/fuji EC17DS
hi my name is hal and i'm kind of new to the golf carting world. i've become bored with go karts, atc's, and atv's so i bought my first cart. as for the cart itself im still trying to figure out exactly what year it is. i know its late 70's but i still can't make out the id plate cus the past owner painted over it. i do know it has a 2 stroke single cylinder robin/fuji engine model number EC17DS. its painted blue and i do know its a 175 cc engine. i'm looking for parts because its in need of a rebuild. problem is i'm not having an easy time finding parts for it. personally i think its a neat little engine and it fits my 3 wheel cart just fine so i'd love to rebuild it. so if anyone has any advice as to where i should start looking that would be great.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-21-2008, 10:24 AM | #2 |
Gone Wild
Join Date: Nov 2007
Location: OKOBOJI, IA.
Posts: 247
|
Re: Robin/fuji EC17DS
If its a late 70's its probably a 244cc motor (you hope)
i think the 175cc motor was 1975 and earlier? I dont think you find many parts for the 175cc's. try golfcarcatalog.com & lvssales.com, they seem to have a good selection of old vintage carts Good luck, Dew |
10-21-2008, 05:19 PM | #3 |
Not Yet Wild
Join Date: Oct 2008
Location: Pa
Posts: 5
|
Re: Robin/fuji EC17DS
well i did some research on it and i now know it was made before 1976. and i can tell you for sure that it is a 175cc engine because its marked on the side of the one guard plate. i took the engine apart and found a bit of luck, the head was redone the piston looks brand new and same with the rings. the only part i'm stuck on is the carb gaskets could use a little help and the electrical is in bad shape. i was wondering if that stuff might be a match from a 244cc because finding parts for that engine isn't hard at all
|
10-21-2008, 05:24 PM | #4 |
Not Yet Wild
Join Date: Sep 2008
Location: i live in upstate new york
Posts: 5
|
Re: Robin/fuji EC17DS
hal, try vntagecartparts.com they have older stuff
|
10-21-2008, 05:29 PM | #5 |
Not Yet Wild
Join Date: Sep 2008
Location: i live in upstate new york
Posts: 5
|
Re: Robin/fuji EC17DS
hal, you also can make many of your own gaskets,go to napa or any parts store and get the gasket material you need and make what you need,i have done this for 50 yrs. it may take a little practice but you get better with experience.
|
10-21-2008, 05:36 PM | #6 |
Not Yet Wild
Join Date: Oct 2008
Location: Pa
Posts: 5
|
Re: Robin/fuji EC17DS
well i work at a carquest store/part time mechanic so if i have to make gaskets i will thats not really the prob, but if i could by them well it saves me some time, honestly the only thing wrong with the engine from what i found is the wiring is in bad shape from sitting 4 years without being run. i'm going to change wires and rewire everything up and see what happens. my main question is if this doesn't work are 244cc electrial components the same as a 175cc if i have to get something. btw thanks for all the info so far its really helped me a lot with the cart
|
10-21-2008, 05:39 PM | #7 |
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: Robin/fuji EC17DS
Welcome to the forum Reshy55......................
|
10-21-2008, 05:57 PM | #8 | |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: Robin/fuji EC17DS
Ignition Points Set for 1974 to 1979 E-Z-GO: OEM Part Numbers -13587-G1
Factory Service Manual for 1965 to 1979 E-Z-GO Electric Models X440 and X444 Marathon: OEM Part Numbers -15078-G1 Exhaust Manifold Gasket for 1971 to 1993 E-Z-GO with 2 cycle engine:OEM Part Numbers - 12394-G1 Quote:
|
|
03-11-2009, 05:10 PM | #9 |
Not Yet Wild
Join Date: Apr 2008
Posts: 8
|
Re: Robin/fuji EC17DS
Hey i have the same engine as you do my cart and everything is in excellent shape except for my piston has a crack in it... just wondering if you happened to run across some rebuild kits while in your hunt for answers or if you decided on doing something else with the engine like parting it out :)
|
03-11-2009, 11:49 PM | #10 |
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: Robin/fuji EC17DS
Hello hooty481 and Welcome to the forum.
Next month will be a year since you signed aboard. Glad to see ya post. Lots of good help here. Enjoy!!!! |
|
|
Similar Threads | ||||
Thread | Forum | |||
WTB robin 244cc in KY | Golf Carts and Parts | |||
244 robin motor | Gas EZGO | |||
350 robin save or scrap | Big Block Talk! | |||
P/N for 244 Robin rings | Gas EZGO | |||
Robin 350 | Gas EZGO |