|
|||||||
| Notices | |
|
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
  |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|||||||
| Notices | |
|
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
|
| |
|
|
Thread Tools | Search this Thread | Display Modes |
06-08-2008, 11:25 PM
|
#21 |
|
Peanut
Join Date: Feb 2007
Location: Western Massachusetts
Posts: 606
 |
Re: Removing an EZGO clutch
I bought it at my local golf cart shop for like $35. Contact one of the site sponsors, I am sure they could help ya out!
|
|
|
|
|
|
06-14-2008, 10:29 AM
|
#22 |
|
Not Yet Wild
Join Date: Jun 2008
Posts: 1
|
Re: Removing an EZGO clutch
Great Info you guy's !!!
Does Matt sell used clutches ? Can you buy rebuilt clutches? Thanks, Greg |
|
|
|
06-14-2008, 12:00 PM
|
#23 |
|
Born Wild
Join Date: Mar 2007
Location: South Carolina
Posts: 2,205
|
Re: Removing an EZGO clutch
Good used clutches are hard to come by.
|
|
|
|
06-14-2008, 04:27 PM
|
#24 |
|
Not Yet Wild
Join Date: Apr 2008
Posts: 18
|
Re: Removing an EZGO clutch
I ordered the 3/4" fine thread bolt for the clutch from Mcmaster, but of course you have to buy 5 minimum. For the flywheel, I threaded the original nut on, then bought a cheap universal puller from Metro Tool (a local shop with Harbor Freight like products) for $15, but had to buy long metric bolts (in bulk of course)from McMaster to reach the flywheel mounting holes. It didn't come off easily. Steve.
|
|
|
|
06-15-2008, 01:57 PM
|
#25 |
|
Not Yet Wild
Join Date: Jun 2008
Posts: 1
|
Re: Removing an EZGO clutch
so hey im new to this never worked on an ez go any tips on removing the clutch
|
|
|
|
06-16-2008, 03:30 PM
|
#26 |
|
Not Yet Wild
Join Date: May 2008
Location: California
Posts: 21
|
Re: Removing an EZGO clutch
Here is a pic of the puller I made... 1/2" x 2 7/8" rod and a 3/4" x 2" fine threaded bolt..
 |
|
|
|
07-01-2008, 12:45 PM
|
#27 |
|
Gone Wild
Join Date: May 2008
Location: troy, michigan
Posts: 178
|
Re: Removing an EZGO clutch
nice thinking artrockets that has to work as good as a puller, if not better!
|
|
|
|
07-01-2008, 12:47 PM
|
#28 |
|
Gone Wild
Join Date: May 2008
Location: troy, michigan
Posts: 178
|
Re: Removing an EZGO clutch
hey all i have a stock clutch for sale for a 97 ezgo 295 . pm me and let me know
|
|
|
|
07-22-2008, 03:06 PM
|
#29 |
|
Not Yet Wild
Join Date: Jul 2008
Posts: 5
|
Re: Removing an EZGO clutch
I used the bolt and steel bar method with a wrench and was able to pop the clutch off my '87 it took a little elbow grease (actually quite a bit without an impact) but it worked great.
Thanks, for the great advice |
|
|
|
07-22-2008, 03:14 PM
|
#30 |
|
Goin Nutz =)~
Join Date: Apr 2008
Location: Wichita, Kansas
Posts: 498
|
Re: Removing an EZGO clutch
Another satisfied customer!
  |
|
|
Linear Mode
