lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 09-28-2014, 10:25 AM   #1
rabar4
Getting Wild
 
rabar4's Avatar
E-Z-GO
 
Join Date: Aug 2014
Location: West Michigan
Posts: 104
Default 1989 Driven Clutch Rebuilt

Does anybody know where i can find a rebuild kit for the driven clutch unit on the 1989 Marathon? i have no problem finding up to year 1988 but nothing for mine.
Looking for the bushings and seals that reside in the moving sheave.
Thanks
rabar4 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 09-28-2014, 10:18 PM   #2
redcloud
Gone Wild
 
Join Date: May 2013
Posts: 320
Default Re: 1989 Driven Clutch Rebuilt

Try the below link but you may have to peice the kit. You should have same clutch as 3pg marathons. I recommend a high torque spring. You may need a new ramp and buttons as well if the clutch is not to far gone.
http://www.franklingolfcar.com/
redcloud is offline   Reply With Quote
Old 09-29-2014, 10:41 AM   #3
rabar4
Getting Wild
 
rabar4's Avatar
E-Z-GO
 
Join Date: Aug 2014
Location: West Michigan
Posts: 104
Default Re: 1989 Driven Clutch Rebuilt

Quote:
Originally Posted by redcloud View Post
Try the below link but you may have to peice the kit. You should have same clutch as 3pg marathons. I recommend a high torque spring. You may need a new ramp and buttons as well if the clutch is not to far gone.
http://www.franklingolfcar.com/
Thanks for the reply redcloud, clutch itseld is not bad at all, nor are the ramps. I do have the 3pg motor in my cart, cant seam to find any rebuild kit for bushings and seals. I can find the ramps for it. I can also find this one all day long.

http://www.franklingolfcar.com/E-Z-G...Belt-p/647.htm

Anymore ideas would be awesome.. even if i could find the bushings specs i could have a couple modified or made. Thanks
rabar4 is offline   Reply With Quote
Old 10-07-2014, 09:18 PM   #4
redcloud
Gone Wild
 
Join Date: May 2013
Posts: 320
Default Re: 1989 Driven Clutch Rebuilt

Man can not figure out why my last posting to this did not go through but here goes again.
Is your clutch the same as what is on page H1 in manual? If it is, you should go by that clutch and that is in a 90/91 3pg unit. You can get ramp, buttons, button bolts and high torque spring kit for that clutch. I recommend the high torque spring. That bushing must be for a diff clutch as it is not in mine that I ever saw.
redcloud is offline   Reply With Quote
Old 10-08-2014, 08:36 PM   #5
rabar4
Getting Wild
 
rabar4's Avatar
E-Z-GO
 
Join Date: Aug 2014
Location: West Michigan
Posts: 104
Default Re: 1989 Driven Clutch Rebuilt

Quote:
Originally Posted by redcloud View Post
Man can not figure out why my last posting to this did not go through but here goes again.
Is your clutch the same as what is on page H1 in manual? If it is, you should go by that clutch and that is in a 90/91 3pg unit. You can get ramp, buttons, button bolts and high torque spring kit for that clutch. I recommend the high torque spring. That bushing must be for a diff clutch as it is not in mine that I ever saw.
something went wrong here redcloud. its not just you. My post went missing as well. I seen your last post and replied first with "yes sir it is the same" then went on to say that I ended up putting Green Loctite in to hold the bushing tight and take up room as recommended by Mr 1989Marathon
rabar4 is offline   Reply With Quote
Old 10-14-2014, 02:11 PM   #6
redcloud
Gone Wild
 
Join Date: May 2013
Posts: 320
Default Re: 1989 Driven Clutch Rebuilt

The 3pg engine was started in 89 and ended in 93. The clutch that is on yours is the same as what they say a 90 to 93. You can get high torque spring kits for that and buttons and a new ramp and many other small items for it.
One key factor I found on my dead used cart that I purchased. After doing a long block and new primary clutch along with many other mods on it I still was not real happy with the performance. After checking all things I order a new bushing washer that goes into the driven clutch under the hold on bolt. When I got it, it was the same size as the one on it as I had thought the washer was loose and warn but decided that I may as well keep the old one in as they were the same...Well darn hold on bolt seemed to come off and get loose allot until I lost the bolt totally in my yard. I then ordered a new bolt and washer for my year and low and behold I got a washer that fit into the clutch nice and tight and smaller hole matching the hold on bolt. After installing the new parts my cart takes off like crazy and runes like it never did before. Found that company that I purchased the first new washer from sent me one for the years after and not the correct one. to make it a shorter story the origional owner must have installed the wrong one also. The pressure put on the clutch is enough that if that clutch is not totally held in place with no flexing, you will not have a smooth running cart with no good top end either.
Jut some rambling that may help some one with some running issues that seem to be unfixable.
redcloud is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
How do I know if my primary clutch needs rebuilt Gas Yamaha
Drive Clutch or Driven Clutch Gas EZGO
Shimming a driven driven clutch Gas EZGO
Dive Clutch and Driven Clutch. Is this right?? Gas EZGO


All times are GMT -5. The time now is 11:27 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.