|
|||||||
| Gas golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
|
|
|
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|||||||
| Gas golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
|
|
|
|
|
|
|
Thread Tools | Search this Thread | Display Modes |
07-24-2008, 12:38 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2007
Location: Topeka, Kansas
Posts: 9
|
Par Car lift
Has anyone lifted a pre 96 Par Car?
|
|
|
|
|
|
|
07-24-2008, 10:26 PM
|
#2 |
|
Not Yet Wild
Join Date: Nov 2007
Location: Ozarks
Posts: 14
|
Re: Par Car lift
My neighbor has lifted his par car its a utility model elec
|
|
|
|
|
08-19-2008, 08:43 PM
|
#3 |
|
Gone Wild
Join Date: Sep 2007
Location: Central Mn
Posts: 162
|
Re: Par Car lift
I have an '88 that I lifted.
|
|
|
|
|
08-20-2008, 10:40 PM
|
#4 |
|
Not Yet Wild
Join Date: May 2008
Posts: 5
|
Re: Par Car lift
I have a 96 parcar with a 6" lift all home made but if you go to columbias website they sell one
|
|
|
|
|
08-21-2008, 06:59 PM
|
#5 |
|
Gone Wild
Join Date: Sep 2007
Location: Central Mn
Posts: 162
|
Re: Par Car lift
I am not proud of my welds but I do have good penetration
 I dropped my steering gear down about 2". I stretched the upper control arms. I lengthened the steering shaft (yes I know it's out of phase but it works well). I notched the rear frame so the engine could sit lower. I added about 4" blocks to the rear with small section of exhaust pipe in the center to keep the spring from sliding out. I also lowered the rear shock mount. |
|
|
|
|
08-21-2008, 07:00 PM
|
#6 |
|
Gone Wild
Join Date: Sep 2007
Location: Central Mn
Posts: 162
|
Re: Par Car lift
Finished
|
|
|
|
Linear Mode
