Got A New Cart Im Working On(help)

mtwalet

Got A 1970 Hd 3 Wheeler Im Working On For The Family. But The Steering Is Sloppy. Is That The Bearings? Also I Am Haveing Trouble Taking Off The Steering Wheel Too To Get The Cover Off Is There Atool I Need To Get That Bad Boy Off? Hope You Guys Can Help Me Out Thatnks Mtwalet

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

roady89

Is this an electric or gas harley?

mtwalet

Sorry It Is Gas

mucklizard

Sweet congrats

tew45

The steering wheel sometimes is hard to pull. some use a 2 or 3 arm gear puller. I just loosen the nut to the top of the threads and pull with both hands and have someone hit the nut with a hammer. I use a 50/50 mixture of ATF and acetone for a loosening liquid (best I have ever found). Do not damage the threads. The steering box can be adjusted for some play and that may be enough. Sometimes the bearings are worn. You need to pull the front fiberglass and inspect the steering box and tie rods and ball joints. It is page 2-34 in the manual!

smokindawg

Jack the front of the cart up where you can see all the steering parts and get to them. Then hold the wheel/tire in place while someone else moves the steering wheel left and right and see if you can find any slop. This will point you in the direction of what needs fixed/repaired too get the steering back where it should be.