lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas golf carts
Gas golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts.



Post New Thread  Reply
Thread Tools Display Modes
Unread 02-19-2013, 11:46 PM   #1
Not Yet Wild
 
Join Date: Jan 2013
Posts: 23
Default Kohler K241 Solenoid and Regulator

Work continues on my 1967 Cushman Golfster Trophy. This week I'm spending time learning about the electrical system.

The voltage regulator is dented, all kinds of rusted, heavy and just ugly. So I found a replacement http://www.ebay.com/itm/271079124375 (also available on amazon). I've verified through a couple of websites that this is compatible with the K241.

The solenoid is presenting some problems, however. I can't find any part numbers for this thing. There aren't any markings on the outside, nor any brand markings. This site (http://www.usautoelectric.com/special-_-offers/) has a ton listed. For instance, this model: http://www.usautoelectric.com/store-...097949072.html

But I'm unsure of what I can use to replace the old one. The housing on the old one has rusted beyond repair, and I'd really like to replace it. Any suggestions, info, etc?

Thanks!
Attached Images
File Type: jpg IMG_20130219_234112.jpg (501.8 KB, 0 views)
andrew_ is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 02-23-2013, 05:09 PM   #2
Gone Wild
Cushman
 
Join Date: Dec 2012
Location: Central North Carolina
Posts: 372
Default Re: Kohler K241 Solenoid and Regulator

Those are pretty standard, but you need to verify the voltage that will be going across the two small terminals when it's activated. These come with several different coil voltages and you will need the one with the correct voltage for your cart. The one you have picked is a 12 volt. If you can test your circuit with power it should be easy to measure the voltage between the two small terminals, or if you can follow a schematic or wiring diagram for your cart you should be able to determine which voltage it should be. Other than the coil voltage, any one of these that are the same in appearance, size and terminal positions should work for you. Just buy the one with the correct coil voltage.

Charley
CharleyL is offline   Reply With Quote
Unread 08-24-2016, 11:37 AM   #3
Not Yet Wild
Cushman
 
Join Date: Jul 2016
Location: Northern VT
Posts: 3
Default Re: Kohler K241 Solenoid and Regulator

Lots of 1956 and up Fords ran a similar 12V solenoid ....with flat backing plate The Kohler shop manual K241 has good wiring diagram.
BAD57 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas golf carts


Thread Tools
Display Modes


Similar Threads
Thread Forum
Kohler CH 440 Big Block Talk!
kohler 20hp Big Block Talk!
Clutch for Kohler 23 HP???? Big Block Talk!
Kohler Big Block Talk!
Kohler BB? Big Block Talk!


All times are GMT -5. The time now is 01:40 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.