02-19-2018, 08:24 PM | #1 |
Gone Wild
Join Date: Aug 2007
Location: North Texas
Posts: 2,312
|
Fuel tank
I have been in the need for a good plastic fuel tank and a very good forum member sent me one at no charge. I'm sure we all would do something when we can but we can't. I found these replacements around 3 years age and put it on the forum but it is hard to find so here is the info:
US Plastic has new tanks. The tank part number is: Natural color 13898 and the black tank is number 13899 Don't forget the cap which is an un-vented number 13901 (The vented is unnecessary) The pickup tube is 14531 (comes with an elbow) The pickup tube grommet is number 14528. Please check the dimensions and numbers before you order. It is on their web site catalog. Now for you that need a new check valve (screened) just try Dennis Kirk for part number 1827 at $4.95. Please stickey this if possible! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-20-2018, 01:23 PM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,046
|
re: Fuel tank
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
02-20-2018, 06:49 PM | #3 |
Gone Wild
Join Date: Dec 2012
Location: Central North Carolina
Posts: 526
|
Re: Fuel tank
For me, the link that you posted opens to Streaming Music And Books. Maybe a correction is needed.
I relined my old metal tank with an epoxy-like material from KBS Coatings, purchased through Amazon. They sell kits of different sizes, depending on the tank size. The kit contains a cleaner, rust removing etchant, and the coating material. It took me a few hours spread out over several days to do, but the inside of my original tank is now rust free, fully coated, and leak proof. It's been several years since I did this, and there are no signs at all of any deterioration of the lining. For pin holes, you just temporarily seal them from the outside with tape or clay until the lining material is installed and cured, then remove the tape or clay. The lining material seals the pin holes permanently. Charley |
05-17-2020, 11:10 PM | #4 |
Not Yet Wild
Join Date: May 2020
Posts: 8
|
Re: Fuel tank
I am in need a fuel tank if anyone has extra, metal or plastic will work. ill buy but i see the link its 72 bucks us plastic, let me knowl
|
05-18-2020, 12:38 PM | #5 | |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
|
Re: Fuel tank
Quote:
https://www.buggiesgonewild.com/showthread.php?t=153195 |
|
05-18-2020, 12:47 PM | #6 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Fuel tank
Us plastic is great for tanks A lot of different sizes
https://www.usplastic.com/catalog/it...4163&catid=578 |
05-22-2020, 12:22 PM | #7 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: Fuel tank
Bump
|
05-13-2021, 10:20 AM | #8 |
Not Yet Wild
Join Date: May 2021
Location: Myrtle Beach SC
Posts: 5
|
Re: Fuel tank
My Harley plastic Harley tank seems to be in good condition. Is their a way to add a Fuel Gauge to it?
|
05-13-2021, 10:27 AM | #9 | |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Fuel tank
Quote:
https://www.ebay.com/itm/16464689695...Cclp%3A2334524 |
|
05-13-2021, 11:21 AM | #10 |
Not Yet Wild
Join Date: May 2021
Location: Myrtle Beach SC
Posts: 5
|
Re: Fuel tank
Thank You VERY MUCH!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G1 empty fuel filter=bad fuel pump or tank vaccuum? | Gas Yamaha | |||
fuel tank | Gas Harley Davidson | |||
WTB G2 or G9 fuel tank | Golf Carts and Parts | |||
Need EZ GO fuel tank | Golf Carts and Parts | |||
Par Car Fuel Tank | Gas Columbia ParCar |