07-29-2009, 06:42 PM | #1 |
Not Yet Wild
Join Date: Jul 2009
Posts: 14
|
1969 Harley New Carb no gas
I have a 1969 Harley I was getting too much fuel before and the carb was in bad shape. I purchased a new carb and when it is installed I get no fuel. If I put my hand over the carb intake while the engine is rotating I fell a good suction, and if I spray a little starter fluid in the carb it will start for a short period. The reed valve looks fine. I am puzzled.
There is one adjustment on the carb and I have moved it from closed to open with the same results. Thanks in advance for any help. Pat |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-29-2009, 09:43 PM | #2 |
Gone Wild
Join Date: Apr 2009
Location: Milton Wi.
Posts: 708
|
Re: 1969 Harley New Carb no gas
Check your gas line for air leaks.
check your reed plate to see if the vac. hole is pluged. 3/4 turn out on the carb set srew is a good place to start. check for air leak around the carb also |
07-30-2009, 10:27 AM | #3 |
Not Yet Wild
Join Date: Jul 2009
Posts: 14
|
Re: 1969 Harley New Carb no gas
AH..."check your reed plate to see if the vac. hole is pluged."
I have not checked that...thanks. I will let you know how it goes... |
07-30-2009, 12:49 PM | #4 |
Not Yet Wild
Join Date: Jul 2009
Posts: 62
|
Re: 1969 Harley New Carb no gas
I was told if the Control Lever isn't exactly flush with the bottom of the metering chamber, there will be issues with operation.
I just rebuilt my carb last night...hoping I got it right. LOL. |
07-30-2009, 09:38 PM | #5 |
Gone Wild
Join Date: Apr 2009
Location: Milton Wi.
Posts: 708
|
Re: 1969 Harley New Carb no gas
Thats correct , the control lever has to be flush.
|
07-30-2009, 11:24 PM | #6 |
Not Yet Wild
Join Date: Jul 2009
Posts: 14
|
Re: 1969 Harley New Carb no gas
What is the control lever? WHat does it look like?
|
07-31-2009, 12:22 PM | #7 |
Not Yet Wild
Join Date: Jul 2009
Posts: 62
|
Re: 1969 Harley New Carb no gas
It's the flat piece of steel that has a hinge pin through the center. Spring underneath on one side and on the other is usually a forked side holding the inlet needle. Sometimes not forked and just flat sitting on the inlet needle.
I found this thread when I was hunting a manual. It's somewhat useful...but not the same model Tillotson. http://www.arboristsite.com/showthread.php?t=64450 |
07-31-2009, 12:25 PM | #8 |
Not Yet Wild
Join Date: Jul 2009
Posts: 62
|
Re: 1969 Harley New Carb no gas
Also...are you gettin gas to the carb? I would check your fuel hose and strainer valve. Make sure there are no clogs. New fuel filters are only $5 if I remember right.
|
07-31-2009, 12:41 PM | #9 |
Not Yet Wild
Join Date: Jul 2009
Posts: 14
|
Re: 1969 Harley New Carb no gas
Yes fuel is getting to the carb, just not throuh the carb. The fuel filter is new. I have not had a chance to check the reed plate vacuum hole yet. I am uessin that is pobably the problem...I think it would not suck any gas throuh the carb if that is plugged.
|
07-31-2009, 03:12 PM | #10 |
Not Yet Wild
Join Date: Jul 2009
Posts: 14
|
Re: 1969 Harley New Carb no gas
OK-are you ready for this...when I take the plastic cover off the carb, and try to blow throuh it...it is sealed...this is a brand new carb...I think I can drill it out carefully...it looks like a plastic moulding issue...just to make sure, I took an old carb I have and took the plastic piec off and it is as clear as a tunnel...
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G1 Carb. jet on outside of carb ? What the Heck ? | Gas Yamaha | |||
1969 harley 3 wheel Model D | Golf Carts and Parts | |||
Harley 3 wheel model D gas 1969 | Golf Carts and Parts | |||
1969 Harley Golf Cart Model D | Golf Carts and Parts | |||
Harley help | Electric golf carts |