lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 11-10-2014, 11:22 PM   #1
Gabriel
Not Yet Wild
Yamaha
 
Join Date: Nov 2014
Location: Oklahoma
Posts: 5
Default Help with G9e to G9a-ish Conversion

Good evening all,

I am in need of some help on a project cart that I just picked up. My previous experience is limited to cosmetic and electrical additions to an Ez Go cart some friends and I used to tool around Oklahoma State football game tailgates. That one still belongs to a friend who recently put a snow mobile motor/trans in it.

On to the new project... I picked up a Yahama G9E (90% sure) that had been converted at some point from electric to gas. The old man I got this from had to replace the first engine due to failure and decided to go with a 12.5 Briggs and Stratton and accompanying trans from a riding lawn mower. This was all sorts of janky as he used a tensioner to control the drive belt from the engine to the trans and then the trans drove the differential via chain. I un-did the majority of the old man's handy work today and am at a loss on a few things.

The biggest issue is the differential does not appear to be similar to the ones I am seeing as I search this site and is chain driven. There is a cover that is not shown on the attached picture that attaches to the right of the differential and the spline and sprocket are attached to the cap of cover with a cut out in the spacer between the diff and cover. Also, he decided to lift the rear suspension by flipping the rear axle and swingarm and I can't for the life of me see where to reinstall the bottom of the rear shocks once I remove the blocks that he fabricated. Parts diagrams I have seen show there are supposed to be brackets at the front of the rear axle at the collars but the ones on my cart are bent correctly but are not drilled for the shocks to be mounted.

I have a line on a few engines and have been reading up on the clone engines. I have access to If anyone can give me some insight on how you'd build a cart if you started off with just a roller, I'd appreciate it.

Wish list:
Start with pedal
HP/TQ on a budget, decent acceleration and decent mph
Reverse
4-6" lift, not the lanky way it is done now
Ability to run lights/radio

Thanks for any comments or help.
Attached Images
File Type: jpg IMG_3543.jpg (217.4 KB, 0 views)
File Type: jpg IMG_3547.jpg (213.9 KB, 0 views)
File Type: jpg IMG_3545.jpg (215.8 KB, 0 views)
Gabriel is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 11-10-2014, 11:38 PM   #2
smokindawg
Gone Wild
 
smokindawg's Avatar
Yamaha
 
Join Date: Sep 2012
Location: Missouri
Posts: 2,755
Default Re: Help with G9e to G9a-ish Conversion

If it were me, I'd look for a cart that was already gas. To change the one you have the best way, you'll need a gas rear to start with. Then all the wiring will need to be added including to have a pedal start.

Way too much changing to convert.
smokindawg is offline   Reply With Quote
Old 11-11-2014, 03:06 AM   #3
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,449
Default Re: Help with G9e to G9a-ish Conversion

That rear axle is the original one for electric use. The transmission is from the riding tractor, or whatever the motor came from, not from a golf cart. This conversion plan will be difficult, because the rear frame is much different & shorter than a Gas model.
cgtech is offline   Reply With Quote
Old 11-11-2014, 01:38 PM   #4
Gabriel
Not Yet Wild
Yamaha
 
Join Date: Nov 2014
Location: Oklahoma
Posts: 5
Default

Quote:
Originally Posted by smokindawg View Post
If it were me, I'd look for a cart that was already gas. To change the one you have the best way, you'll need a gas rear to start with. Then all the wiring will need to be added including to have a pedal start.

Way too much changing to convert.

Well crap. Quite a bit of wiring and conversion has already happened so it looks like this one is in limbo; lots of work to go back to electric and lots to get to get it to non-janky gas.

Quote:
Originally Posted by cgtech View Post
That rear axle is the original one for electric use. The transmission is from the riding tractor, or whatever the motor came from, not from a golf cart. This conversion plan will be difficult, because the rear frame is much different & shorter than a Gas model.

I had been thinking about a motorcycle drive train or something unconventional but it seems like I'll be better off scraping that idea and parting ways with this cart.
Gabriel is offline   Reply With Quote
Old 11-12-2014, 01:27 PM   #5
Gabriel
Not Yet Wild
Yamaha
 
Join Date: Nov 2014
Location: Oklahoma
Posts: 5
Default

Anyone have any other unorthodox ideas to get this sucker running? How about if we toss out the need for reverse and pedal start?
Gabriel is offline   Reply With Quote
Old 11-12-2014, 08:35 PM   #6
smokindawg
Gone Wild
 
smokindawg's Avatar
Yamaha
 
Join Date: Sep 2012
Location: Missouri
Posts: 2,755
Default Re: Help with G9e to G9a-ish Conversion

To change it to gas, your going to have to get a gas rear differential to do it right. And the swingarm with the rear would be a good idea too.

There may be a way to do it using what you have, but without seeing it I don't know of any way. I've done some things that others said wouldn't work before, but I can make my own stuff a lot of the time and I have access to a lot of junk... errrrr...... treasures to pick thru that help with my projects. So unless you have fab skills, the tools to do them and a pretty good supply of scrap items, it will be way more work than you may want to get into.

If you decide to go forward with it, I'm sure you'll get plenty of help here.
smokindawg is offline   Reply With Quote
Old 11-12-2014, 08:52 PM   #7
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,449
Default Re: Help with G9e to G9a-ish Conversion

The rear swingarm is shorter on the "e" model, so the swingarm from the "a" model wont help much, unless you want the rear wheels sticking Way out the back like a drag bike or hill climber.
cgtech is offline   Reply With Quote
Old 11-12-2014, 09:11 PM   #8
Gabriel
Not Yet Wild
Yamaha
 
Join Date: Nov 2014
Location: Oklahoma
Posts: 5
Default

Quote:
Originally Posted by smokindawg View Post
To change it to gas, your going to have to get a gas rear differential to do it right. And the swingarm with the rear would be a good idea too.

There may be a way to do it using what you have, but without seeing it I don't know of any way. I've done some things that others said wouldn't work before, but I can make my own stuff a lot of the time and I have access to a lot of junk... errrrr...... treasures to pick thru that help with my projects. So unless you have fab skills, the tools to do them and a pretty good supply of scrap items, it will be way more work than you may want to get into.

If you decide to go forward with it, I'm sure you'll get plenty of help here.

I have access to the tools, plenty of junk, and people with plenty of fab experience but also know when enough is enough. Not quite there yet. I have a line on a cheap 110cc motor and Trans from a friend's buggy/cart that I'm going to take measurement from tomorrow. This may be a stop gap to get me into a better cart.


Quote:
Originally Posted by cgtech View Post
The rear swingarm is shorter on the "e" model, so the swingarm from the "a" model wont help much, unless you want the rear wheels sticking Way out the back like a drag bike or hill climber.

If I did go with a gas rear and swing arm, I would be too long unless I lifted it, then it would kind of normalize, right?
Gabriel is offline   Reply With Quote
Old 11-13-2014, 01:33 AM   #9
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,449
Default Re: Help with G9e to G9a-ish Conversion

No, WAY longer, like wheels under the rear bumper. Not near the wheel openings.
cgtech is offline   Reply With Quote
Old 11-13-2014, 07:07 AM   #10
Gabriel
Not Yet Wild
Yamaha
 
Join Date: Nov 2014
Location: Oklahoma
Posts: 5
Default

Quote:
Originally Posted by cgtech View Post
No, WAY longer, like wheels under the rear bumper. Not near the wheel openings.

That's no good. Is there a market for "e" rolling chassis?
Gabriel is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
PDS 36V- 48V conversion Electric EZGO
conversion Electric Club Car
36 to 48 conversion Electric Club Car
Need help with conversion Big Block Talk!


All times are GMT -5. The time now is 12:58 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.