lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
Thread Tools Display Modes
Unread 11-15-2008, 01:55 PM   #1
Getting Wild
 
weekendwarriorfsw32's Avatar
Yamaha
 
Join Date: Mar 2008
Posts: 102
Default Problem with rebuild

Hello all,
You might remember me asking about rebuilding a G2 golf cart. Any ways I did it and it ran good and no more smoke!
Now after about a day of ridding I started to blow fuses and now all it does when I hit the gas is blows the fuse?
So I am kinda wondering what I screwed up here. Also it won't start now. When I put it in reverse and I hear the buzzer and the second I hit the gas the buzzer goes off and when I let off the gas the buzzer goes back on.
So what kind of problems do you think i have,
Thanks
Nick
weekendwarriorfsw32 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 11-15-2008, 03:06 PM   #2
BGW Sponsor
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 66,149
Default Re: Problem with rebuild

Wiring? OR a wire has shorted or come off?
scottyb is offline   Reply With Quote
Unread 11-15-2008, 03:10 PM   #3
Getting Wild
 
weekendwarriorfsw32's Avatar
Yamaha
 
Join Date: Mar 2008
Posts: 102
Default Re: Problem with rebuild

Quote:
Originally Posted by scottyb View Post
Wiring? OR a wire has shorted or come off?
Any Ideas where to start?
weekendwarriorfsw32 is offline   Reply With Quote
Unread 11-15-2008, 04:50 PM   #4
Not Yet Wild
 
wingnut's Avatar
Yamaha
 
Join Date: Jun 2008
Location: Jackson Tennessee
Posts: 39
Default Re: Problem with rebuild

I guess knowing where to start would begin with how and what you took apart. I would start with the wires leaving the vicinity of te micro switch @ the gas pedal and work back from there. If you dont have a wiring schematic Id advise you to get one and as in any situation check one wire at a time.
wingnut is offline   Reply With Quote
Unread 11-15-2008, 05:08 PM   #5
Getting Wild
 
weekendwarriorfsw32's Avatar
Yamaha
 
Join Date: Mar 2008
Posts: 102
Default Re: Problem with rebuild

Quote:
Originally Posted by wingnut View Post
I guess knowing where to start would begin with how and what you took apart. I would start with the wires leaving the vicinity of te micro switch @ the gas pedal and work back from there. If you dont have a wiring schematic Id advise you to get one and as in any situation check one wire at a time.
Where is the best place to get one?
weekendwarriorfsw32 is offline   Reply With Quote
Unread 11-15-2008, 05:09 PM   #6
Admin/Ninja
 
spriddle's Avatar
Yamaha
 
Join Date: Dec 2006
Location: TN
Posts: 24,595
Default Re: Problem with rebuild

Quote:
Originally Posted by weekendwarriorfsw32 View Post
Hello all,
You might remember me asking about rebuilding a G2 golf cart. Any ways I did it and it ran good and no more smoke!
Now after about a day of ridding I started to blow fuses and now all it does when I hit the gas is blows the fuse?
So I am kinda wondering what I screwed up here. Also it won't start now. When I put it in reverse and I hear the buzzer and the second I hit the gas the buzzer goes off and when I let off the gas the buzzer goes back on.
So what kind of problems do you think i have,
Thanks
Nick
Make sure nothing (accessory lights, radio, etc....) is grounded to the frame anywhere. On a Yamaha, all accessories have to be grounded to the neg. post of the battery. If not, it will blow the main fuse every time.

spriddle is offline   Reply With Quote
Unread 11-15-2008, 07:54 PM   #7
Sometime's............
 
smallblock450sl's Avatar
Yamaha
 
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,052
Default Re: Problem with rebuild

Spriddles right again. Standard fuses are 10 amp. When we install accessories we upgrade to 20 amp main fuse. This could cure your problem, or "smoke" the wire harness where the real "short" is. Nice to see you post again, sorry your having this problem. Later Dave
smallblock450sl is offline   Reply With Quote
Unread 11-15-2008, 08:31 PM   #8
Getting Wild
 
weekendwarriorfsw32's Avatar
Yamaha
 
Join Date: Mar 2008
Posts: 102
Default Re: Problem with rebuild

Well thanks for you help guys. I figured out I had crossed to wires and I switched them and presto it worked! Thanks again guys
weekendwarriorfsw32 is offline   Reply With Quote
Unread 11-15-2008, 09:36 PM   #9
Admin/Ninja
 
spriddle's Avatar
Yamaha
 
Join Date: Dec 2006
Location: TN
Posts: 24,595
Default Re: Problem with rebuild

It's always good when it turns out to be a simple fix. Too bad some of the most simple things can be the most troublesome in the beginning.

spriddle is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
244 rebuild Gas EZGO
'96 CC top-end rebuild????? Gas Club Car
Club Car Rebuild Gas Club Car
82 Marathon Rebuild Members Rides
Rebuild Tools? Gas EZGO


All times are GMT -5. The time now is 11:21 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.