|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-11-2015, 06:12 AM | #1 |
Not Yet Wild
Join Date: Mar 2014
Posts: 31
|
G16 primary replacement
My g16 primary is beyond repair in my eyes and I was looking for new ones.
I found one on eBay that is brand new says it will fit several G carts. But it looks different from my original. Will it work? Better or not as good as the original? Please help Thanks ken |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-11-2015, 06:21 AM | #2 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: G16 primary replacement
I think I'd steer clear of a non-OEM clutch. How bad is yours? If it can be rebuilt, Don at Plowmans can do it.
http://www.plowmanscarts.com/carts.c...1428339689&v=2 |
04-11-2015, 06:57 AM | #3 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G16 primary replacement
I'm with Dave here! Something worrling at 4 grand, 8 inches under my butt, I want either Genuine Yamaha or Plowmans!!
|
04-11-2015, 07:16 AM | #4 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: G16 primary replacement
|
04-11-2015, 08:04 AM | #5 |
Not Yet Wild
Join Date: Mar 2014
Posts: 31
|
Re: G16 primary replacement
Mine was rebuilt at plowmans a little less than a year ago.
Noticed it sticking opened it up and saw a roller had a flat spot. He said now they measure the shaft before rebuilding. If it's too far gone they don't rebuild anymore. Mine was probably too far gone and rebuilt anyway. So 400.00 for a new one Or 200.00 for this. He said it's an oem Yamaha clutch. Is it not? Maybe a more current version? |
04-11-2015, 09:25 AM | #6 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G16 primary replacement
Looks like the new JW8 OEM primary clutch. Wish there was a picture with the cap off. If so....it would work great.
|
04-11-2015, 10:30 AM | #7 |
Not Yet Wild
Join Date: Mar 2014
Posts: 31
|
Re: G16 primary replacement
Here it is with the cover off
|
04-11-2015, 10:33 AM | #8 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G16 primary replacement
It's a steal at 200.00 buy it
|
04-11-2015, 11:48 PM | #9 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G16 primary replacement
The second picture is a G9 clutch, but its still a great deal for a complete clutch for $200!!
I paid $185 for just the sliding sheave, 6 yrs ago!! |
04-12-2015, 10:07 AM | #10 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G16 primary replacement
Actually it's a new G29 style clutch Mike. I like the weights much better, there steel and should not wear out like the G2 style
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G2 primary clutch | Gas Yamaha | |||
G16 Primary clutch bushing replacement. | Gas Yamaha | |||
84 Primary Clutch | Gas EZGO | |||
primary clutch on G2 | Gas Yamaha | |||
primary clutches | Gas EZGO |