|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-11-2015, 02:38 PM | #1 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
yamaha g2 engine help
Hey guys i have a yamaha g2 and i replaced the carb and i turned the needle 1-1/2 turns out, well the motor keeps cranking and cranking and its getting spark and has a new spark plug
I notice when i take the black tube off the carb that goes to the air breather it has some gas in it and when the black tube is off it blows kinda alot of gas out ????? But cant get it to fire what should i do next ??? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-11-2015, 02:49 PM | #2 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,569
|
Re: yamaha g2 engine help
Try some starting fluid with the choke and throttle opened
|
09-11-2015, 06:14 PM | #3 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,862
|
Re: yamaha g2 engine help
Take off your valve cover and crank over the engine. See if the valves are opening and closing all the way. Adjust valves, .004 on both when engine is cold.
|
09-11-2015, 09:18 PM | #4 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: yamaha g2 engine help
Thanks ill try that smallblock im sending u a pm
|
09-12-2015, 10:08 AM | #5 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: yamaha g2 engine help
One rod is loose with lots of play the rocker does not touch it ???? Is it rebuild quality lol
|
09-12-2015, 10:38 AM | #6 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,862
|
Re: yamaha g2 engine help
Just follow the sticky "valve adjustment" and see what happens.
|
09-12-2015, 11:08 AM | #7 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: yamaha g2 engine help
But the rod is not moving on one side ? And is inch or more away from the rocker
|
09-12-2015, 11:42 AM | #8 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,862
|
Re: yamaha g2 engine help
When you "by hand" turn the engine over, both pushrods don't move up and down? Are both valves at the same heighth when closed?
|
09-12-2015, 01:20 PM | #9 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: yamaha g2 engine help
Left side goes up and down the passenger side does nothing
|
09-12-2015, 01:40 PM | #10 |
Gone Wild
Join Date: May 2010
Location: OHIO
Posts: 1,517
|
Re: yamaha g2 engine help
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
FS: 92 yamaha G8 engine | Golf Carts and Parts | |||
WTB Yamaha G8 engine | Golf Carts and Parts | |||
Yamaha G9 Engine | Golf Carts and Parts | |||
EZ go with Yamaha engine | Gas EZGO | |||
Yamaha G16 engine | Golf Carts and Parts |