|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
10-22-2015, 01:24 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2012
Location: Monroeville Indiana
Posts: 18
|
G9 Speed Issues
I have a 93 G9, just rebuilt the motor put the Ploughman performance kit on it ( exhaust and rear clutch) and after tuning everything in it only goes 12 mph. Im not a wrencher but have it at shop and Im told with the way the carb is set up and the throttle cable it should be running 25 mph. Any ideas? At last resort I will take it 4 hours away to Don Ploughman himself to figure out but really don't want to.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-22-2015, 02:25 PM
|
#2 |
|
It's Beer Time!
Join Date: Sep 2010
Location: Vineland, NJ
Posts: 1,462
|
Re: G9 Speed Issues
Is the governor still connected? Got plenty of power up to 12mph? Or is it sluggish?
|
|
|
|
|
10-22-2015, 09:26 PM
|
#3 |
|
Not Yet Wild
Join Date: Mar 2012
Location: Monroeville Indiana
Posts: 18
|
Re: G9 Speed Issues
I believe it is still connected but not sure Id have to check with the shop. They are at a loss on this
|
|
|
|
|
10-23-2015, 07:13 AM
|
#4 |
|
It's Beer Time!
Join Date: Sep 2010
Location: Vineland, NJ
Posts: 1,462
|
Re: G9 Speed Issues
Stock speed with the governor at factory setting was around 12-13 mph. The governor is located on top of the differential. Run the 10mm nut in almost all the way to tighten the spring. That should get you close to 20 mph. A lot of people on here just bypass the governor. There is a sticky on this. Have a read.
http://www.buggiesgonewild.com/gas-y...or-bypass.html |
|
|
|
|
10-23-2015, 07:23 AM
|
#5 |
|
maintaining a low profile
 Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: G9 Speed Issues
Doesn't the performance kit from Plowmans include the procedure for the gov bypass? It doesn't make much sense to make the improvements and keep the gov in place.
After I put the kit on the G22, Don gave me the instructions for the gov delete and valve adjustment over the phone... |
|
|
|
|
10-23-2015, 10:48 AM
|
#6 |
|
Not Yet Wild
Join Date: Mar 2012
Location: Monroeville Indiana
Posts: 18
|
Re: G9 Speed Issues
Don did the same for me the gov is set to his specs that is what is confusing to him and my tech
|
|
|
|
|
10-23-2015, 07:34 PM
|
#7 |
|
Gone Wild
Join Date: Nov 2013
Posts: 1,088
|
Re: G9 Speed Issues
What did you do to the governor? Did you drill it out or bypass and run cable to carb?
|
|
|
|
|
12-24-2015, 12:47 AM
|
#8 |
|
Not Yet Wild
Join Date: Mar 2012
Location: Monroeville Indiana
Posts: 18
|
Re: G9 Speed Issues
Update the ignitor was bad runs 32 now
|
|
|
|
|
12-24-2015, 08:22 AM
|
#9 |
|
It's Beer Time!
Join Date: Sep 2010
Location: Vineland, NJ
Posts: 1,462
|
Re: G9 Speed Issues
Glad you got it figured out.
|
|
|
|
|
12-24-2015, 09:41 AM
|
#10 |
|
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G9 Speed Issues
Wow!! I'd say that's fast for that era of car!! Good for you!!
 |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G29 speed Issues?!?! | Gas Yamaha | |||
| 93 EZGO having speed issues | Electric EZGO | |||
| Club car speed issues | Electric Club Car | |||
| powerdrive 2 issues and speed issues. | Electric Club Car | |||
| Club Car gas speed issues | Gas Club Car | |||
Linear Mode
