lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
Thread Tools Display Modes
Unread 02-14-2016, 11:49 PM   #1
Not Yet Wild
 
Join Date: Jul 2015
Posts: 3
Default Does anyone make a G16 Lowering Kit?

I would like to lower my 2000 G16, but I am having a hard time finding a lowering kit for it. Is there a company out there the makes a kit for this? Air ride is not an option. the pictures that I attached, are the look that I am going for.
Thank You



SCott300 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 02-15-2016, 02:45 PM   #2
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 15,247
Default Re: Does anyone make a G16 Lowering Kit?

No kit that I'm aware of. Do a search (at the top) to see what these guys are doing.

TheNewGuy is offline   Reply With Quote
Unread 02-15-2016, 08:10 PM   #3
Sometime's............
 
smallblock450sl's Avatar
Yamaha
 
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 10,726
Default Re: Does anyone make a G16 Lowering Kit?

You can.."with extreme messurements and alighnment", cut the end off the lower contorl arm, raise the spindle mounting flange and reweld it,for a 1 to 2 inch drop. I do recommend you have your wheel/tire combo first for trial fitting and steering lock to lock and any rubbing. The real problem is making shure the camber is correct before final welding. The rear...no problem, g8 front shocks on the rear work great. That first picture looks like some custom made lower control arms. Good luck on your vision
smallblock450sl is offline   Reply With Quote
Unread 02-15-2016, 10:04 PM   #4
Not Yet Wild
 
Join Date: Jul 2015
Posts: 3
Default Re: Does anyone make a G16 Lowering Kit?

Quote:
Originally Posted by smallblock450sl View Post
You can.."with extreme messurements and alighnment", cut the end off the lower contorl arm, raise the spindle mounting flange and reweld it,for a 1 to 2 inch drop. I do recommend you have your wheel/tire combo first for trial fitting and steering lock to lock and any rubbing. The real problem is making shure the camber is correct before final welding. The rear...no problem, g8 front shocks on the rear work great. That first picture looks like some custom made lower control arms. Good luck on your vision
The first one was a kit that is no longer made. It was made by a company called "manboobsracing" but they dont seem to be around any longer. I was just hoping that someone else would have picked up where they left off.
SCott300 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
95 txt lowering kit Electric EZGO
Lowering a gas EZ go txt On Road Golf Carts!
lowering mt txt Electric EZGO
lowering Design Center
lowering an ez go? Design Center


All times are GMT -5. The time now is 07:41 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.