|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
03-06-2016, 01:41 AM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2013
Posts: 1
|
G2 primary clutch bushings
I'm trying to figure out the procedure for replacing the 2 bushings in the primary clutch of an '85 G2. The clutch has a bit of movement, so I ordered bushings and seals. Do these need to be pressed out?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-06-2016, 11:58 AM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G2 primary clutch bushings
Yes
|
|
|
|
|
03-06-2016, 05:26 PM
|
#3 |
|
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G2 primary clutch bushings
I've got 3 pictures in my profile album with captions, on this if you care to go look.
I drove mine out with a punch, slowly/gently!! |
|
|
|
|
03-06-2016, 09:42 PM
|
#4 |
|
Vegas modded 420
 Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: G2 primary clutch bushings
If you have a punch with a flat end be careful not to cut into the clutch, you can drive them out from the other side. I pressed mine in, you should be able to take maybe a big socket and carefully tap them in straight.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Need primary clutch to secondary clutch distance on a G9 | Gas Yamaha | |||
| Leaf spring bushings, do they make polyurethane bushings? | Gas Club Car | |||
| yamaha g2 primary drive clutch bushings (fitment issue) | Gas Yamaha | |||
| G9-g16 primary clutch | Gas Yamaha | |||
| primary clutch on G2 | Gas Yamaha | |||
Linear Mode
