|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-17-2016, 12:14 AM | #1 |
Not Yet Wild
Join Date: Mar 2016
Posts: 65
|
G1 engine
Are there any Yamaha g1 motors out there? Just got my first g1 and the engine runs great but leaks like crazy. What are my engine options anyone?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-17-2016, 03:56 AM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G1 engine
leaks what like crazy? if its oil, you need to stop running it until you can confirm its not a oil feed line to the oil injection pump, or oil feed to carb (this WILL kill your motor). its a big deal when the oil pump gets any air in it (takes serious concentrated work to get all the air back out of that system). it should only use about 1 tank of oil per 10 tanks of fuel, so any air in those lines is slow to get pumped out (easily long enough to destroy the engine from lack of lubrication).
|
08-17-2016, 07:48 PM | #3 |
Not Yet Wild
Join Date: Mar 2016
Posts: 65
|
Re: G1 engine
Okay so its not exactly leaking out spraying everywhere but its all coated have a look at these pics of it
160817_0002.jpg 160817_0001-1.jpg 160817_0003.jpg Any ideas? |
08-17-2016, 08:39 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G1 engine
i would just reseal what you got. maybe freshen it up with a rebuild.
|
08-18-2016, 01:03 PM | #5 |
Not Yet Wild
Join Date: Mar 2016
Posts: 65
|
Re: G1 engine
Any idea where all this leaked from?
|
08-18-2016, 01:47 PM | #6 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: G1 engine
It's probably from the crank seals. Common on 2 strokes. Most will tear the engine down and do a simple rebuild, new piston and rings, seals, gaskets.
|
08-18-2016, 07:05 PM | #7 |
Not Yet Wild
Join Date: Mar 2016
Posts: 65
|
Re: G1 engine
I was looking and the complete rebuild kits are about $500
Will definitely rebuild it just wanted to find a second engine (a backup) so when one needs rebuilt the cart doesn't have to sit idle. If anyone could point me to a rebuild thread I would appriceiate it. I have been searching and reading a lot but can't locate a thread about rebuilding a g1 engine. Thanks |
08-18-2016, 08:47 PM | #8 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: G1 engine
|
08-18-2016, 09:04 PM | #9 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: G1 engine
Don't buy the kit take it apart and see what piston you have and buy one size bigger and have your local machine shop bore it out minus new crank bearings gasket seals and piston you can do it for about $250
|
08-19-2016, 02:26 AM | #10 |
Not Yet Wild
Join Date: Mar 2016
Posts: 65
|
Re: G1 engine
Too bad there is no kit to buy a larger piston and jug
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1984 2 cycle engine engine diagram? | Gas EZGO | |||
1984 ezgo marathon engine replacement to atv engine | Gas EZGO | |||
Engine and Wireing Diagram Robin Engine Model # EC253PG | Gas EZGO | |||
Engine blues...update on my engine knock | Gas Yamaha | |||
Amsoil Synthetic engine oil or Royal Purple engine oil | Big Block Talk! |