|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-17-2016, 01:12 PM | #1 |
Not Yet Wild
Join Date: Jul 2016
Location: Central Missouri
Posts: 25
|
Swapping ignitors
Was told in another thread I could swap my g2 ignitor for a g9. Anyone have instructions or diagram on how to do it.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-17-2016, 06:56 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Swapping ignitors
You would need the G9 ignitor and wire harness.
|
08-18-2016, 05:23 PM | #3 |
Not Yet Wild
Join Date: Jul 2016
Location: Central Missouri
Posts: 25
|
Re: Swapping ignitors
If I can get a g9 harness is it straight forward swap or do I have a lot of hoops to jump through
|
08-18-2016, 06:08 PM | #4 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Swapping ignitors
Pretty straight forward. The only problem would be the G9 uses an automatic voltage regulator (a specific plug on the wire harness that plugs into it) and the G2 uses an adjustable Hatatchi voltage regulator with the 3 wires using eye ends held on with screws. There would be no wire harness lead for the low oil level float on the G9 wire harness. Also, the G2 uses "spade connector's" for the solenoid activating wires where a G9 would use eye ends. Pretty simple. Good luck
|
|
|
Similar Threads | ||||
Thread | Forum | |||
answers to ignitors and reaming king pins | Gas Club Car | |||
Swapping Controllers? | Electric Club Car | |||
Help! G16 Swapping LT-A700X In It?? | Bike & ATV Engine Swaps | |||
86 CC swapping to a clone | Clone Engine Swaps | |||
swapping carbs | Gas Yamaha |