|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-10-2009, 06:29 PM | #1 |
Not Yet Wild
Join Date: Dec 2008
Location: reading,mi
Posts: 42
|
91 g-2 rear-end
got a small problem i think my rear imput shaft on my 91 g-2 is BENT. had a bad shake from the rear end. took rear body off and was watching the rear clutch and it was wobling. then i watched the nut on the shaft and it was moving as if the shaft was bent, any sugestions
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-10-2009, 06:50 PM | #2 | |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: 91 g-2 rear-end
Quote:
|
|
02-10-2009, 07:15 PM | #3 |
Not Yet Wild
Join Date: Dec 2008
Location: reading,mi
Posts: 42
|
Re: 91 g-2 rear-end
it does have a zirk fitting and i replaced the bushing. the cir-clip is bad but i put it in neutral and gas it slowly it looks like the nut is moving side to side.can watch both clutch sides move together also. if it is the shaft i will prob just replace the rear end.
|
02-10-2009, 07:22 PM | #4 |
Gone Wild
Join Date: Sep 2007
Location: maine
Posts: 3,352
|
Re: 91 g-2 rear-end
i should have a used shaft if you need one let me know. i will help you out send me a pm if you need one.
|
02-10-2009, 08:01 PM | #5 |
Not Yet Wild
Join Date: Dec 2008
Location: reading,mi
Posts: 42
|
Re: 91 g-2 rear-end
thanks im gonna get ahold of a dial runout and check it the correct way first.
|
02-10-2009, 10:23 PM | #6 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: 91 g-2 rear-end
Pull the belt off and shake it, make sure it is bent or maybe a failed bearing causing slop.
|
02-11-2009, 10:45 PM | #7 |
Getting Wild
Join Date: Sep 2008
Posts: 94
|
Re: 91 g-2 rear-end
i have a rear end off a 91 g9 may not be the same but if you can get it to work e-mail me at monstertruckr81@yahoo.com ill take 250 for it.... its complete drum to drum with brakes and secondary sheeve but i think it needs a spring
|
02-27-2009, 08:59 PM | #8 |
Not Yet Wild
Join Date: Dec 2008
Location: reading,mi
Posts: 42
|
Re: 91 g-2 rear-end
so i bought a torgue spring from tom and it looks like either both clutch sleaves are bent in the same spot or the shaft is bent. bummer.
|
02-27-2009, 09:55 PM | #9 |
Getting Wild
Join Date: Sep 2008
Posts: 94
|
Re: 91 g-2 rear-end
if interested in the rear end call me at 636-699-9399 my names robby i havent done alot with my cart because its cold outside and i dont have a garage but spring right around the corner
|
02-27-2009, 09:58 PM | #10 |
Getting Wild
Join Date: Sep 2008
Posts: 94
|
Re: 91 g-2 rear-end
i wonder how thee shaft got bent ??????
|