|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-23-2017, 02:14 PM | #1 |
Getting Wild
Join Date: Mar 2017
Posts: 75
|
Yamaha G1 charging coil leads
How many wire leads should be coming out of my charging coil ?
When I pulled my engine apart and pulled the stator plate there were the 2 coils .... Charging and pulsar ... Pulsar had 2 wires w/r .. w/g . Charging coil only had 1 brown wire Stator plate had a wire holding clip secured with a connector and black wire The photo shows my magneto wires and how they were when I took it apart except the black wire has been replaced with the green wire The white is a shrink wrap around the 2 wires coming from pulsar coil Does charging coil have 2 wires coming out of the windings ? 1 .. brown ... 1 ... Black |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-23-2017, 02:32 PM | #2 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: Yamaha G1 charging coil leads
Here wiring diagram should have a brown and a black black is going to ground
|
05-23-2017, 04:15 PM | #3 |
Getting Wild
Join Date: Mar 2017
Posts: 75
|
Re: Yamaha G1 charging coil leads
Yes I have the same diagram
But does the black wire originate from the coil or does it originate from the wire holder screw? I'm testing my entire ignition system to identify why my engine will only give me a pop and stops the entire engine not pop and keep rolling |
05-23-2017, 05:35 PM | #4 |
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: Yamaha G1 charging coil leads
The holder is just that a holder the eyelet connector should not be there there should be four wires coming out three female connectors and one male male being the ground that plug into the wiring harness
|
05-24-2017, 12:01 AM | #5 |
Getting Wild
Join Date: Mar 2017
Posts: 75
|
Re: Yamaha G1 charging coil leads
So the w/r and g/r originate from the pulsar coil
The brown and black wire originate from the charging coil I don't have a harness with connectors ... I had to pull the fan off and run wires from the coils... Ok ... So when I pulled the magneto off I had 2 wires coming from the pulsar coil and 1 brown wire coming from the charging coil and 1 black wire attached to the set screw ... Just like in the photo .... Green wire represents the black .... I didn't have a harness with connectors I had 4 wires that had been cut |
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha jf2 ignitor, coil, pulsar coil for sale | Golf Carts and Parts | |||
Charging source coil | Gas Yamaha | |||
Magneto charging source coil | Gas Yamaha | |||
Charging Coil On Clone | Clone Engine Swaps | |||
Duromax 16 charging coil | Clone Engine Swaps |