|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
08-14-2017, 08:02 PM
|
#1 |
|
Gone Wild
Join Date: Jul 2016
Location: West Salem, Ohio
Posts: 511
|
Jake's double a arm lift kit
Hey guys need some help here.. on the rear shock mounts the instructions show the 2nd hole may need drilled on some models. I am putting this lift on my 86 G2.. if I use the top hole of the bracket supplied with the factory shock mounts , I have no place to drill into frame for the second bolt. It looks to me that the bottom holes of the bracket need to mount in the factory holes and a hole drilled for the top hole. Sending a picture along.. anyone got pics of your mounting?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-14-2017, 09:32 PM
|
#2 |
|
Gone Wild
Join Date: Jul 2016
Location: West Salem, Ohio
Posts: 511
|
Re: Jake's double a arm lift kit
pics of what I have going on..
|
|
|
|
|
08-15-2017, 06:51 AM
|
#3 |
|
Gone Wild
Join Date: Jul 2016
Location: West Salem, Ohio
Posts: 511
|
Re: Jake's double a arm lift kit
Having this issue with the wife front end.. the old single guys arm lift kit had 4 pick up points to move shocks to allow front end to level out.. anyone have suggestions on what you did to correct tires from towing out at the top.
|
|
|
|
|
08-15-2017, 07:09 AM
|
#4 |
|
maintaining a low profile
 Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: Jake's double a arm lift kit
Are those OEM shocks?
|
|
|
|
|
08-15-2017, 08:08 AM
|
#5 |
|
Gone Wild
Join Date: Jul 2016
Location: West Salem, Ohio
Posts: 511
|
Re: Jake's double a arm lift kit
Yes Dave they are OEM shocks with a 1/2" clamp collar.
|
|
|
|
|
08-15-2017, 09:07 AM
|
#6 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: Jake's double a arm lift kit
On the rear I welded a muffler clamp to the extensions that clamped to the frame tube that is just forward of the extensions. No pic here at work, let me know if you want a pic I should have something at home. This was on my G9, not the G2.
|
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
08-15-2017, 09:32 AM
|
#7 |
|
Addictive Personality
Join Date: Jun 2017
Location: Rio Linda, Ca.
Posts: 1,289
|
Re: Jake's double a arm lift kit
Here is a pic of the jake's rear shock extensions on my G1.
20170627_173105.jpg They look different than the ones for your G2. I did have to drill holes in rear cross brace of frame to install. Maybe the instructions are universal. Be careful not to try adjusting the front until you can road test it as the front will sit differently once it is driven. I made the mistake of adjusting my front before I drove it and ended up way off after road test. I ended up having my daughter drive cart while I watched front tires. After several adjustments of spring rate on shocks and toe I finally got the alignment acceptable. |
|
|
|
|
08-15-2017, 09:33 AM
|
#8 |
|
Gone Wild
Join Date: Jul 2016
Location: West Salem, Ohio
Posts: 511
|
Re: Jake's double a arm lift kit
Ron pics are worth a 1000 words.. pics please
 |
|
|
|
|
08-15-2017, 10:26 AM
|
#9 | |
|
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: Jake's double a arm lift kit
Quote:
|
|
|
|
|
|
08-15-2017, 06:04 PM
|
#10 |
|
Gone Wild
Join Date: Jul 2016
Location: West Salem, Ohio
Posts: 511
|
Re: Jake's double a arm lift kit
The lift kit was brand new.. king pins fit very tight..
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Double A arm lift? | Lifted Golf Carts | |||
| Jakes double arm lift kit | Lifted Golf Carts | |||
| g9 double a-arm lift kit (has anyone tried one) | Gas Yamaha | |||
| 1992 G9 Double A Arm lift | Gas Yamaha | |||
| Double Lift? | Design Center | |||
Linear Mode
