|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
12-26-2017, 01:55 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2017
Posts: 17
|
G16 with Jake's lift kit. Is this Panhard bar bent?
I recently purchased a 2002 G16 and it has a Jake's lift kit on it. I noticed the rear is a little offset and I suspect the panhard bar is bent but I'm not sure if they are supposed to be straight or not? The square tube brace between the lower rails was definitely bent and I already straightened it. As seen in the picture, it was bent where the paint is missing. Question now is, is this panhard bar also bent or is this what it's supposed to look like?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-26-2017, 02:04 PM
|
#2 |
|
maintaining a low profile
 Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: G16 with Jake's lift kit. Is this Panhard bar bent?
The panhard bar should be straight. I believe that is the problem.
JN6-F2172-00-00 |
|
|
|
|
12-26-2017, 02:21 PM
|
#3 |
|
Getting Wild
Join Date: Apr 2017
Posts: 134
|
Re: G16 with Jake's lift kit. Is this Panhard bar bent?
Yes it should I just installed one on my cart it’s a G16
Sent from my iPhone using Tapatalk |
|
|
|
|
12-26-2017, 03:05 PM
|
#4 |
|
Not Yet Wild
Join Date: Dec 2017
Posts: 17
|
Re: G16 with Jake's lift kit. Is this Panhard bar bent?
That's what I suspected. I feel better about pulling it off and fixing it now. Thanks for the info!
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| panhard sway bar ? | Gas Yamaha | |||
| Bent rear leaf spring after lift kit install | Lifted Golf Carts | |||
| Bent my spindle lift:Long travel, Here I come! | Lifted Golf Carts | |||
| Jake's G22 lift fit G16 | Gas Yamaha | |||
| Jake's lift... right kit? | Gas Yamaha | |||
Linear Mode
