|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-29-2018, 05:36 PM | #1 |
Not Yet Wild
Join Date: Oct 2017
Location: Waterford, WI
Posts: 31
|
Dropping engine cradle mount on lifted G22a - Bracket?
I wasn't sure if I should put this here or under lifted carts; the coin said try here first.
I just installed a BMF 6" A-arm lift kit on my '05 G22a and not surprisingly, the engine cradle is now sitting on a pretty extreme angle. I see that Vegas Carts has a bracket to lower the cradle mount on a G2/G9, but I can't find anything for the G22. It's looking like I have three options and I'm looking for opinions and advice. 1. Does someone make a bracket to lower the front of the cradle? 2. Should I make something myself to lower the front of the cradle? 3. Should I just crack open a beer and not worry about the angle? Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-29-2018, 08:35 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Dropping engine cradle mount on lifted G22a - Bracket?
#1- I have never seen one, or anyone that has made one. #2- If you fab, why not? I would build a bracket off the main frame and one off the swing arm to except heim joint's like the Ezgo's. #3-Have a cocktail and relax...I've done many 6" lift's and never had an oiling problem with the Yamaha engine. If you decide on a big block, would be a different story. If you leave it this way, might recommend a JW1 choke cable. They are longer then the Ju0 cables and help the binding problem. #4- Have a beer or coctail
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2pg Engine Cradle?? | Gas EZGO | |||
WTB Solonoid mount bracket and key switch plate for 99 EZGO | Golf Carts and Parts | |||
Controller Mount/Bracket P/N .. | Electric EZGO | |||
snubber mount bracket issue | Gas Club Car | |||
Engine cradle for G-9 | Big Block Talk! |