clutc removal g9

Lee Wood

I have a 87 g9 4 '' lift the drive clutch is bad I've removed outer portion and one of the links is broken. How do you remove the inner sheeve or do i have to. Thinking of buying a comet high perfomance clutch to replace stock one any suggestions? I also have a starting issue when depressing gas pedal i hear a click but no start if you hold the pedal down it seems that the starter begins to turn the motor and cart will start , seems like the switch under the gas pedal is bad. thanks for any insight . Lee

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

scottyb

Have you checked the battery?

Flintrock

Lee Wood, you need the clutch puller tool for that inner sheave. You can buy one from a site sponsor, check to see if there is a loaner available here, or take the motor to a golf cart shop and see if they will help you out. It's really very simple and quick, you just need the right tool!

DOOmsman

see stickies above you pay postage I have one you can use in central Ill

Lee Wood

Im a auto mechanic I may have something that may work what does the puller look like . Are the comet clutches any good? Does the switch under the gas pedal start the motor?

smallblock450sl

As I have said in the past, I would just buy the Yamaha weight kits and rebuild the stock clutch. and you wouldn't need the "special" fixed sheave puller tool. I personally don't like the Comet clucth for early Yamaha's, they seem to not engage till a higher RPM. Just my 2 cents worth. On the starting issue...if you hear a "click", means the solenoid is energizing, so all components are ok up to the soilenoid. Either the solenoid is not letting battery voltage flow thru or a problem with the starter/generator (maybe brushes). If you like I could give you some tests with a voltmeter. Later Dave