|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-15-2009, 08:47 PM | #1 |
Not Yet Wild
Join Date: Jan 2009
Posts: 11
|
tensioner broke again
ok, need some help from you experts. i found out why i needed a shorter belt my tensioner was missing. so i installed a new one. well after about couple times of driving the cart. checked to make sure tensioner was still tight, broke again, i know i didnt have to tight. could it be a bent engine bracket or mount? i have a 96 g14 gas
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-16-2009, 07:17 AM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: tensioner broke again
Check the engine mounts, could be broken. I believe the tensioner should have 1/8" gap to allow the engine to move that much.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
03-16-2009, 08:21 AM | #3 |
Not Yet Wild
Join Date: Jan 2009
Posts: 11
|
Re: tensioner broke again
the front mounts or rear? i see the front are rubber mounts. i know now why had to pt a shorter belt.
|
03-16-2009, 10:53 AM | #4 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: tensioner broke again
Check both front and rear.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
03-18-2009, 08:53 AM | #5 |
Getting Wild
Join Date: Sep 2008
Posts: 94
|
Re: tensioner broke again
i have a g-9 does it have a tensioner?dont mean to high jack the thread but i have a broke front motor mount under the primary clutch ....would this cause the cart to pull to the left while giving it gas ?
|
03-18-2009, 10:13 AM | #6 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: tensioner broke again
Yes you have one under the air box. Replace the broken engine mount and check/adjust the tensioner, that should help with the pulling.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Broke my 350 | Gas EZGO | |||
My baby broke | Electric EZGO | |||
Harley Golfcart Broke >>>> Help !!!! | Gas Harley Davidson | |||
broke rod today | Gas EZGO | |||
Broke something again!!!!! | Lifted Golf Carts |