|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-15-2018, 03:45 PM | #1 |
Not Yet Wild
Join Date: Mar 2018
Posts: 62
|
G9 4 stroke electric problems
No power on the switch. Can jump the solenoid and motor will turn over but not getting spark from spark plug.
Sent from my SAMSUNG-SM-G930A using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-17-2018, 06:51 PM | #2 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: G9 4 stroke electric problems
Check the pedal switch, it can be bypassed to test it. The power goes to key, then pedal, then fires up starter and ignition. Key does not go out very often. Also check other connections and battery cables, etc. Connection bad is common.
|
03-17-2018, 07:11 PM | #3 | |
Not Yet Wild
Join Date: Mar 2018
Posts: 62
|
Re: G9 4 stroke electric problems
Quote:
Sent from my SAMSUNG-SM-G930A using Tapatalk |
|
03-17-2018, 07:25 PM | #4 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: G9 4 stroke electric problems
If the wire is not hot, you have a power issue trace it back I think it hooks on through the fuse and to the generator or battery. If you do and solenoid not working try bumping tapping it some, when mine went out I could stomp on the floor in front of it and cart would start. They are not cheap but last near forever. You can't use a car solenoid its not constant duty. Make sure you check all wires before you buy something, very common to have wire connection issues. Some grounds are wired also check those, you will see 12v there but it wont work because the ground is corroded/bad connection. If you test 12v to that ground you will see nothing.
|
05-21-2018, 03:31 PM | #5 | |
Not Yet Wild
Join Date: Mar 2018
Posts: 62
|
Re: G9 4 stroke electric problems
Found out it was a grounding issue. The motor wasn't grounded. So I ran a jumper from ground to motor. Another to key switch
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
more 2 stroke problems | Gas EZGO | |||
Ez Go Marathon 2 stroke problems | Gas EZGO | |||
ezgo 2 stroke problems | Gas EZGO | |||
2 stroke Backfiring problems when warm | Gas EZGO | |||
1989 2 Stroke Problems | Gas EZGO |