|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-20-2018, 10:22 AM | #1 |
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
G29 engine build
I'm not new to building the 357cc yamis over the years have built over 50 of them. Maintaining the stock specs for most people. I do dabble in the performance side of the builds also. I recently have a build with lightened flywheel,timing advance key,cut the head tighten compression. Port polished head that has been flow benched, shimed valve springs, lager valves,3 angle valve job, I have custom ground my own cam for the first time. I'm having trouble due to such a extreme rocker angle. I know this can be fixed with longer pushrods. I just don't know we're to find some I might have to make my own. Any help would be great. I know this kind of goes of subject of golf cart and more towards motor building. But hoping someone might be able to chime in. Thanks.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-21-2018, 07:08 AM | #2 | |
Not Yet Wild
Join Date: Aug 2015
Posts: 18
|
Re: G29 engine build
Quote:
Sent from my XT1254 using Tapatalk |
|
04-21-2018, 09:57 AM | #3 |
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: G29 engine build
Ya that what I was thinking thanks for the reply
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Briggs 18 HP engine build | Big Block Talk! | |||
G1 engine build project | Gas Yamaha | |||
Engine choice for custom build | Big Block Talk! | |||
G14 engine build | Gas Yamaha | |||
first build new clutch or engine? | Gas Club Car |