|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-01-2018, 07:40 PM | #1 |
Not Yet Wild
Join Date: Jul 2018
Posts: 47
|
Rebuild g16 still smoking
Just rebuild motor on g16 and still smoking. Took about 20 minutes of run time before it started. I rebuilt it according to specs.
Replace valves but one looked like odd size. Replaced all gaskets. Replaced valve stem seals. Any ideas? Sent from my Pixel 2 XL using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-01-2018, 08:24 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: Rebuild g16 still smoking
I can't say for shure, but it may be when you ran it for 20 minutes the muffler got hot and was burning out all that oil that got in there from the old worn rings. I useually run it at a medium rpm for 10 minutes, let it cool off, another 10 and it useually burns it out. Hope that's the case for you.
|
08-01-2018, 08:35 PM | #3 |
Not Yet Wild
Join Date: Jul 2018
Posts: 47
|
Re: Rebuild g16 still smoking
I ran it for ten minutes. Oil was 3/4 full on stick from min to full. Changed oil . Ran a few minutes and same. So depressing
Sent from my Pixel 2 XL using Tapatalk |
08-01-2018, 09:46 PM | #4 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,433
|
Re: Rebuild g16 still smoking
What did you do with the bore and rings?
|
08-01-2018, 09:48 PM | #5 |
Not Yet Wild
Join Date: Jul 2018
Posts: 47
|
Re: Rebuild g16 still smoking
I replaced runs. And hone cylinder. I'm going to try running longer. It smoked when I got it. So exhaust and breather could be full of oil. And maybe some on air filter. Hope it clears.
Sent from my Pixel 2 XL using Tapatalk |
08-02-2018, 10:37 AM | #6 |
LIFE IS TAKING FOREVER
Join Date: Apr 2010
Location: DANSVILLE NY
Posts: 5,327
|
Re: Rebuild g16 still smoking
I rebuilt an engine that someone had run for a long time with it smoking and after the build it still smoked bad. I changed the muffler and it stopped. Smallblock has it right with just running it for awhile or if you have another muffler swap it out.
|
08-02-2018, 11:12 AM | #7 |
Not Yet Wild
Join Date: Jul 2018
Posts: 47
|
Re: Rebuild g16 still smoking
I think i found the issue, I ran it for 15 minutes and the oil level went up. I then pulled the carb and found lots of moisture on the inside between carb and cylinder.
I took it apart and seems the float in carb is not working well. I also have new air filters/spark plug and fuel filter coming today so I will change that as well.. I need to test the carb float. |
08-02-2018, 11:35 AM | #8 |
Not Yet Wild
Join Date: Jul 2018
Posts: 47
|
Re: Rebuild g16 still smoking
The float seems to be okay as far as sealing. However when i took this measurement I was closer to .4 and the specs say .57 Thinking of order new carb so its clean and everything.
See attached image. Thoughts? https://ibb.co/b8EE5e |
08-02-2018, 07:38 PM | #9 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: Rebuild g16 still smoking
I'm not trying to be rude, did you order an expensive OEM carb or an after market? In my experience you would have better off ordering a new OEM needle then the worthless knock off carb. Good luck on your fix
|
08-02-2018, 07:40 PM | #10 |
Not Yet Wild
Join Date: Jul 2018
Posts: 47
|
Re: Rebuild g16 still smoking
Didn't order anything. So no offense taking. Thanks for heads up
Sent from my Pixel 2 XL using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Fresh rebuild, 295cc, smoking bad on one cylinder | Gas EZGO | |||
Need help with G16 smoking | Gas Yamaha | |||
G22 Smoking and Gas in oil | Gas Yamaha | |||
G16 Smoking | Gas Yamaha | |||
New g9 smoking bad | Gas Yamaha |