|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-24-2019, 11:39 PM | #1 |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
G2 Front Hydraulic Brakes
Looking to share a idea I'm building to see what type of interest there is. Front Jake's brake kit on stock G2 a arms. Adjustable camber and caster --- stock height. I'm removing the outer end of the a arm - the king pin bracket - replacing it with a 2" wide by 3/8" thick by 6" long. Drilled - slotted - hole sawed to fit the end of the a arm. Uses 2 - 1/2" bore by 5/8-18 male heim joints to attach the spindle to the a arm with a 1/2x6" grade 8 bolt. The male heim joints use 2 flange nuts making it possible to move the upper joint in and out setting the camber --- the bottom hole is slotted so you can set the caster and you can move the joint in and out also.
I finally got a G2 Brake Kit that I can use to mock up the set up and get pictures. Over the next few days I'll post pictures of my progress. Remember - no lift kits needed to run this. In the future I'll share the bracket dimensions and numbers for hydraulic rear brakes with parking brake. Jake's use WilWood brake products and what I suggest is the companion calipers just like the front only with a cable park brake. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-12-2019, 09:43 PM | #2 |
Gone Wild
Join Date: Aug 2012
Location: Monroe, Wisconsin
Posts: 516
|
Re: G2 Front Hydraulic Brakes
Any luck with the installment? Any ideas how to make the kit work for the rear instead of the cable discs or drum brakes?
Sent from my SM-G935R4 using Tapatalk |
08-13-2019, 06:04 AM | #3 |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: G2 Front Hydraulic Brakes
I was able to get the adapters drilled and cut. 2"x6"x3/8" flat steel was drilled 5/8" holes on 4.160 center to center. Then I cut a 1-1/8" on the center of 4.160 with a hole saw for the swing arm tube.
|
08-13-2019, 06:34 AM | #4 | |
Gone Wild
Join Date: Aug 2012
Location: Monroe, Wisconsin
Posts: 516
|
Re: G2 Front Hydraulic Brakes
Quote:
Sent from my SM-G935R4 using Tapatalk |
|
08-13-2019, 12:26 PM | #5 |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: G2 Front Hydraulic Brakes
I didn't build these for myself - they were for another builder.
|
08-13-2019, 01:28 PM | #6 |
Gone Wild
Join Date: Aug 2012
Location: Monroe, Wisconsin
Posts: 516
|
Re: G2 Front Hydraulic Brakes
|
08-13-2019, 02:50 PM | #7 |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: G2 Front Hydraulic Brakes
Yes I can put brakes on the rear of a G2. I've done all the resourcing of parts and have 2 G2's setup with 4 wheel disc brakes with parking brake. The calipers are WilWood bought from Ebay, I bought a replacement hardware kit for a G2 for the wheel studs and nuts and bolts. I made my own caliper supports, the brake lines were made from bulk hose and hose ends. The master cylinder is 2 sided like a car. I haven't found a need for a differential valve as the master cylinder is matched for use in this application. On my first build I put the master cylinder under the floor --- lower then the calipers mounted on the wheels. I had to install 2 2lb residual pressure valves inline on the brake lines. This way I didn't lose my brakes.
|
08-13-2019, 03:33 PM | #8 | |
Gone Wild
Join Date: Aug 2012
Location: Monroe, Wisconsin
Posts: 516
|
Re: G2 Front Hydraulic Brakes
Quote:
Sent from my SM-G935R4 using Tapatalk |
|
08-14-2019, 09:37 PM | #9 |
Gone Wild
Join Date: Aug 2012
Location: Monroe, Wisconsin
Posts: 516
|
Re: G2 Front Hydraulic Brakes
Do you think if I were to get a disc brake caliper mount for a G2 and up that it would work for the hydraulic brakes on the rear? It would give the caliper somewhere to mount to I would think with little modification.
Sent from my SM-G935R4 using Tapatalk |
08-14-2019, 09:38 PM | #10 |
Gone Wild
Join Date: Aug 2012
Location: Monroe, Wisconsin
Posts: 516
|
Re: G2 Front Hydraulic Brakes
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Hydraulic Front Disc Brakes to fit ??? | Golf Carts and Parts | |||
Front Hydraulic Brakes | Electric EZGO | |||
who's using Jakes front hydraulic brakes? | Gas Yamaha | |||
Jake's Hydraulic Front Brakes | Videos | |||
Front Brakes - Hydraulic vs Cable ...suggestions??? | Gas Club Car |