|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-25-2019, 06:26 PM | #1 |
Not Yet Wild
Join Date: Sep 2019
Posts: 7
|
Not downshifting
Ok new to golf carts Posted a question earlier and starting digging in older threads. I just watched YouTube and watched how the clutches work. If mine works fine until I slow down a little it won’t and I know I’m using the wrong words here but downshift. I have to slow way down , almost stopped, then jam on the gas and it will drop into the lower setting. Should I jack it up and press the gas and see if I can get it to simulate it? Or does somebody know what it is or isn’t doing?
Last edited by 71chadallac; 09-25-2019 at 07:19 PM.. Reason: Did some research |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-27-2019, 06:59 AM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
|
Re: Not downshifting
Yes put it up on jackstands and video what's going on. Sounds like your clutches are not working properly. Worn clutches is one of the most common golf cart problems. Lack of proper maintenance will cause the clutches to wear.
|
09-27-2019, 12:55 PM | #3 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: Not downshifting
Depends on what Yamaha it is, but most use the spring in the secondary to close the primary. With those clutches you can pull the outer cover out yourself and the belt will fall in, it should move easily. Could also be the spring in the secondary clutch next to transmission is broken, you might be able to look at it closely and see it or sometimes they break on the end you can't see.
|
09-29-2019, 10:50 AM | #4 |
Not Yet Wild
Join Date: Sep 2019
Posts: 7
|
Re: Not downshifting
Great help guys kind of excited to tear into something new and know nothing about. May turn out good may not, lol it’s the journey right?
|
10-11-2019, 05:59 PM | #5 |
Not Yet Wild
Join Date: Sep 2019
Posts: 7
|
Re: Not downshifting
Ok I put it o jack stands to see what it is doing and the drive clutch pinched togather and never came back apart.assuming I need to get a new clutch???
|
10-11-2019, 07:37 PM | #6 |
Gone Wild
Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: Not downshifting
maybe not. verify exactly what you have and perform maintenance. first thing remove the belt and check end play. then disassemble inspect and possibly repair.
|
10-11-2019, 09:29 PM | #7 |
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: Not downshifting
It could probably use a good cleaning. If not taken care of, they can get build up in them and don't want to open and close very smooth.
|
10-15-2019, 01:44 PM | #8 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: Not downshifting
Depends on what clutch and cart you have. G9 for example the three weights fail and then it does not shift right, you have to buy a new set, or new clutch. Newer ones can have rollers in them that fail, etc.
|
Tags |
clutch adjust? |
|
|
Similar Threads | ||||
Thread | Forum | |||
Upshifting too soon and not downshifting for hills | Gas Club Car |