|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-31-2019, 05:23 PM | #1 |
Not Yet Wild
Join Date: Sep 2019
Posts: 7
|
Primary clutch removal
Bought a new primary clutch and a removal tool. After taking out the main bolt I can’t get the removal tool into the clutch it hits the frame so I can’t get it in there. My cart is a Yamaha G22a don’t know if the a makes any difference.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-01-2019, 02:11 AM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Primary clutch removal
I'm gonna guess you have a lift kit. The bolt fits just fine when the cart is at stock height. Tried putting the left rear wheel on a block or something & had a person stand in the bagwell to compress the suspension?
|
11-01-2019, 08:53 PM | #3 |
Not Yet Wild
Join Date: Sep 2019
Posts: 7
|
Re: Primary clutch removal
Bingo, thank you!!! Just glancing at that I thought that was the frame and it didn’t move but after reading your response I was able to just pick up on the bottom of the cart enough to slide it in. Thanks again.
|
Tags |
clutch tool primary |
|
|
Similar Threads | ||||
Thread | Forum | |||
Primary CLutch Removal | Gas EZGO | |||
G1 Primary Clutch Removal | Gas Yamaha | |||
Primary clutch removal | Gas Melex | |||
G16 primary clutch removal | Gas Yamaha | |||
Primary Clutch Removal | Gas Club Car |