Start of my G2 project

todd108s · 08-01-2009, 05:16 PM

After making room in the garage,I put the cart up on block's.Before I teardown,I have a friend of a friend coming by next week to get my motor dialed in.I prchased the cart with an Arctic Cat 440cc motor.It need's some attention.As soon as I know the motor is good I will do a full teardown and get this thing going.

Let the FUN begin,,,,,,,,

Travis91 · 08-01-2009, 07:56 PM

what kinda tires and wheels. never seen wheels like that

todd108s · 08-02-2009, 12:24 PM

There stock yamaha rhino tire's and wheel's.I got an awsome deal on them I couldn't pass up.I'm most likely going to sell them or trade for one's I can actually use.

Travis91 · 08-03-2009, 01:26 AM

yeah the only problem is those are a different bolt pattern then a cart lol

todd108s · 08-03-2009, 11:43 PM

Ya,I know. I priced some 12" rim's today and I'm looking at about $40 per rim.I'm going to look a little more and see if I can get a better deal on some.I only paid $100. for the tire's and rim's,they may only have about 5 mile's
on-em.I still think I got a great deal.I should be able to sell the rim's and get some of my $$$ back too.

todd108s · 08-19-2009, 11:01 PM

Here's a step in the right direction I hope.

Peice by peice..

Mock up..

I still want to box in the tube's and weld a couple of gusset's for extra strength.....
.

I gained about 4+ on lift and an inch and 1/2 forward.I kinda wish I would have made it a little wider but I still got an inch out of it..

TheNewGuy · 08-20-2009, 07:13 AM

Nice job!!

todd108s · 08-22-2009, 04:44 PM

Ok, I made a little headway today.It now look's like the real work begin's..
I'm allmost ready to sandblast the frame and get it ready for some modification's...

Here's some seat bottom's I came across and the local wrecking yard,I'll see what I can do with them.

And my new rim's came in..

Xtreme Cartz · 08-22-2009, 05:44 PM

Looks good! Where did you buy the delta wheels from?

yamahag9er · 08-22-2009, 06:29 PM

Good job on the front lift. Let the sickness begin.

It only gets worse from here. Looks good.

08-01-2009, 05:16 PM	#1
todd108s Gone Wild Join Date: Jul 2009 Location: Merced Ca Posts: 221	Start of my G2 project After making room in the garage,I put the cart up on block's.Before I teardown,I have a friend of a friend coming by next week to get my motor dialed in.I prchased the cart with an Arctic Cat 440cc motor.It need's some attention.As soon as I know the motor is good I will do a full teardown and get this thing going. Let the FUN begin,,,,,,,,

08-01-2009, 07:56 PM	#2
Travis91 Gone Wild Join Date: Dec 2006 Location: Hartford, Alabama Posts: 462	Re: Start of my G2 project what kinda tires and wheels. never seen wheels like that

08-02-2009, 12:24 PM	#3
todd108s Gone Wild Join Date: Jul 2009 Location: Merced Ca Posts: 221	Re: Start of my G2 project There stock yamaha rhino tire's and wheel's.I got an awsome deal on them I couldn't pass up.I'm most likely going to sell them or trade for one's I can actually use.

08-03-2009, 01:26 AM	#4
Travis91 Gone Wild Join Date: Dec 2006 Location: Hartford, Alabama Posts: 462	Re: Start of my G2 project yeah the only problem is those are a different bolt pattern then a cart lol

08-03-2009, 11:43 PM	#5
todd108s Gone Wild Join Date: Jul 2009 Location: Merced Ca Posts: 221	Re: Start of my G2 project Ya,I know. I priced some 12" rim's today and I'm looking at about $40 per rim.I'm going to look a little more and see if I can get a better deal on some.I only paid $100. for the tire's and rim's,they may only have about 5 mile's on-em.I still think I got a great deal.I should be able to sell the rim's and get some of my $$$ back too.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

08-19-2009, 11:01 PM	#6
todd108s Gone Wild Join Date: Jul 2009 Location: Merced Ca Posts: 221	Re: Start of my G2 project Here's a step in the right direction I hope. Peice by peice.. Mock up.. I still want to box in the tube's and weld a couple of gusset's for extra strength..... . I gained about 4+ on lift and an inch and 1/2 forward.I kinda wish I would have made it a little wider but I still got an inch out of it..

08-20-2009, 07:13 AM	#7
TheNewGuy Admin/Moderator Join Date: Dec 2006 Location: Ohio Posts: 18,047	Re: Start of my G2 project Nice job!!
	Ron PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project

08-22-2009, 04:44 PM	#8
todd108s Gone Wild Join Date: Jul 2009 Location: Merced Ca Posts: 221	Re: Start of my G2 project Ok, I made a little headway today.It now look's like the real work begin's.. I'm allmost ready to sandblast the frame and get it ready for some modification's... Here's some seat bottom's I came across and the local wrecking yard,I'll see what I can do with them. And my new rim's came in..

08-22-2009, 05:44 PM	#9
Xtreme Cartz The Fabricator Join Date: Dec 2006 Posts: 2,016	Re: Start of my G2 project Looks good! Where did you buy the delta wheels from?

08-22-2009, 06:29 PM	#10
yamahag9er Fry's Golf Carts Join Date: Dec 2006 Location: Central Michigan Posts: 857	Re: Start of my G2 project Good job on the front lift. Let the sickness begin. It only gets worse from here. Looks good.

Similar Threads
Thread	Forum
Gas EZ-Go won't start...	Gas EZGO
How does it start?	Gas Harley Davidson
E-Z GO Has Trouble to Start Randomly and Now It Will Not Start	Electric EZGO
new and not sure where 2 start	Gas Club Car
Will not start	Gas Club Car