timing

reckel · 08-10-2009, 04:48 PM

I have been having problems with my G9 so i decided to tear it down and start over! I have a 8 and 6 stamped in the first gear of the crank and a dot on the counter balance, i am assuming that those two go together. On the second gear of the crank i have a dot, the only thing on the cam is a hole in the casting, nothing on the gear itself, i am assuming that those two line up as well. I just want to make sure before i put this thing back together because i really cant find anything wrong with the motor. Thanks

cart de golf · 08-10-2009, 07:19 PM

http://www.buggiesgonewild.com/attac...iming-mark.jpg

go see that picture

08-10-2009, 04:48 PM	#1
reckel Not Yet Wild Join Date: Jul 2009 Posts: 9	timing I have been having problems with my G9 so i decided to tear it down and start over! I have a 8 and 6 stamped in the first gear of the crank and a dot on the counter balance, i am assuming that those two go together. On the second gear of the crank i have a dot, the only thing on the cam is a hole in the casting, nothing on the gear itself, i am assuming that those two line up as well. I just want to make sure before i put this thing back together because i really cant find anything wrong with the motor. Thanks
reckel Not Yet Wild Join Date: Jul 2009 Posts: 9

08-10-2009, 07:19 PM	#2
cart de golf Gone Wild Join Date: Nov 2007 Posts: 469	Re: timing http://www.buggiesgonewild.com/attac...iming-mark.jpg go see that picture
cart de golf Gone Wild Join Date: Nov 2007 Posts: 469

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
g2 timing ??? or not	Gas Yamaha
Timing a G1	Gas Yamaha
Old Gas EZ Go timing	Gas EZGO
94 Ez Go Timing	Gas EZGO
timing	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum