|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-25-2009, 08:43 PM | #1 |
Not Yet Wild
Join Date: Jun 2009
Location: Mooresville, North Carolina
Posts: 26
|
g2 that just quits
Please someone help me. have a 86 g2 that just quits after about 20 min. of run time. Seems to be when everything gets heat soaked. Had carb off and cleaned, needle and seat look fine. New spark plug and Igniter(200 bucks). could the coil be getting hot and giving up? any thoughts would be great.
thanks Mark |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-25-2009, 08:53 PM | #2 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: g2 that just quits
Yes coil or ignitor.
|
08-25-2009, 09:05 PM | #3 |
Gone Wild
Join Date: Sep 2007
Location: maine
Posts: 3,352
|
Re: g2 that just quits
|
08-26-2009, 06:53 PM | #4 |
Not Yet Wild
Join Date: Jun 2009
Location: Mooresville, North Carolina
Posts: 26
|
Re: g2 that just quits
ok so today i drove it until it quit. just before it quit it started to back fire through the carb. pulled spark plug wire off and pluged it into 2nd plug that was grounded. showed to have good spark. put wire back to see if it would start. after spinning over for a few seconeds it started up and ran. then sounded like it was missing and shut off also back fired through the carb again. i hate to throw more parts at it for no reason. stumped
|
08-26-2009, 07:02 PM | #5 | |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,863
|
Re: g2 that just quits
Quote:
|
|
08-26-2009, 08:25 PM | #6 |
Not Yet Wild
Join Date: Jun 2009
Location: Mooresville, North Carolina
Posts: 26
|
Re: g2 that just quits
thanks for your help. i removed all the tape from the wires. Tracing them i found some wire exposed on that 18 guage wire. taped it up and tried it again. hopeing it was arcing to ground on the motor mount. same situation. it cut out after about 15 to 20 min. of run time. the connection looked good at the starter. should i still go ahead and splice a ring terminal on that wire? it really runs great for the 15/20 min. window.
|
08-29-2009, 07:21 PM | #7 |
Not Yet Wild
Join Date: Jun 2009
Location: Mooresville, North Carolina
Posts: 26
|
Re: g2 that just quits
I got it fixed I think. Found out when wiggeling wires I could make it cut out. I started tracing and wiggeling wires. There is a three wire conection next to the igniter. One of the pins was pushed back and not making a good connection. Fixed that and so far me and my sons have been riding all day and no issues. thanks for the help.
|
08-29-2009, 08:20 PM | #8 |
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: g2 that just quits
Thanks for the feedback, will help someone else here, probably real soon!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
yamaha g9 quits after a while | Gas Yamaha | |||
1992 ez go marthon gas quits runing | Gas EZGO | |||
96 club car quits and starts back later | Gas Club Car | |||
g2 that just quits | Gas Yamaha | |||
1993 gas club car starts then quits | Gas Club Car |