|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-25-2009, 02:13 PM | #1 |
Not Yet Wild
Join Date: Nov 2009
Location: Southern Cali
Posts: 1
|
G1 fires it just doesn't stay on
I got a 1980 Yamaha G1 and it wont run by itself. Its getting gas, spark, we took out the carburator took it apart and cleaned it and still nothing, it has plenty of battery voltage, still wont run by itself. We did find one problem with the compresion it was only getting 30 psi but we took it to this guy that customizes carts and he relaced the piston which was chipped around the edges and did an awsome job so now were getting good compression but its still not running on its own. It fires up real nice.
Any suggestions? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-25-2009, 02:47 PM | #2 |
Not Yet Wild
Join Date: Sep 2008
Location: sanford,nc
Posts: 36
|
Re: G1 fires it just doesn't stay on
Cilinton,I have very same problem with my 81/g1,read my post under g1 will not start.I plan doingeverything I can this weekend to get mine to run.I am now going to trace electical wring ,I also plan to pull flywheel to check behind and look at coils there,I will let you know if I have any luck.I know it's a small problem right in my face that I'm not seeing,good luck,Jackie
|
11-27-2009, 12:15 PM | #3 |
Not Yet Wild
Join Date: Nov 2009
Posts: 5
|
Re: G1 fires it just doesn't stay on
I am not certain what you mean by it won't run on its own. I am assuming you know that the engine only turns over and runs when you depress the accelerator pedal. I have heard of others who thought that the engine should run continuously which is not the case. Just thought I would throw that out there.
|
12-05-2009, 05:41 PM | #4 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: G1 fires it just doesn't stay on
Also don't confuse the generator spinning the motor over for it firing/idling.
|
12-05-2009, 06:16 PM | #5 | |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: G1 fires it just doesn't stay on
Quote:
Does the cart move at all when it fires up? |
|
12-05-2009, 06:22 PM | #6 |
Gone Wild
Join Date: Jul 2009
Location: Sand Springs,Ok
Posts: 873
|
Re: G1 fires it just doesn't stay on
I would jack the rear wheels off the floor start the engine hold the gas pedal down.I'f it continues to run and only dies when you let off the gas pedal that is normal.{kill switch on trottle] Good luck
|
12-06-2009, 12:52 AM | #7 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: G1 fires it just doesn't stay on
Is also possible to have a plugged muffler. Often you can hear the air pressure leaking at the pipe to cylinder fitting as the starter spins the motor. If it is loosen the muffler to pull the pipe back some and try starting it. Last one I found there was no air coming out of the exhaust turning engine over, until I stuck a big wire up it.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
'95 G14 fires, won't start | Gas Yamaha | |||
G16 won't stay running | Gas Yamaha | |||
90 Marathon Will not stay running | Gas EZGO | |||
won't stay running | Gas EZGO | |||
Resistor coil fires? | Electric EZGO |