lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
Thread Tools Display Modes
Unread 03-05-2010, 09:47 PM   #11
Getting Wild
 
dogpile's Avatar
Yamaha
 
Join Date: Feb 2010
Location: Lexington, KY
Posts: 111
Default Re: Modifying Governor on G16 & G22

cart de golf
do you have any photos of the exact mod? Im new with the cart stuff but pretty technical BUT the governor is a marvel of technology to me!
dogpile is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 03-10-2010, 06:50 PM   #12
Gone Wild
 
cart de golf's Avatar
 
Join Date: Nov 2007
Posts: 469
Default Re: Modifying Governor on G16 & G22

I took the picture you had posted of your governor I put arrows with numbers for dirrection

1 loosen out to original position

2 look behind there is a 10mm nut loosen it

3 pry up the asembly 1/4 inches of the shaft that comes out of the transmission

4 you will see from the top the bracket is D shaped , you take a 5/16" drill bit & round it out to get rid of the D shape so the bracket can spin freely on the shaft

3 push back at original spot

2 take lock tigh or paint nail polish put it on treads & just tighten by hand no pressure

if you ever sell the cart you can just spot weld it back in place if needed

I hope this clears it up
cart de golf is offline   Reply With Quote
Unread 03-10-2010, 07:06 PM   #13
Gone Wild
 
cart de golf's Avatar
 
Join Date: Nov 2007
Posts: 469
Default Re: Modifying Governor on G16 & G22

here is the picture from you cart
Attached Images
File Type: jpg clutch%20spring%20replacement[1].jpg (167.8 KB, 671 views)
cart de golf is offline   Reply With Quote
Unread 03-10-2010, 07:26 PM   #14
Getting Wild
 
dogpile's Avatar
Yamaha
 
Join Date: Feb 2010
Location: Lexington, KY
Posts: 111
Default Re: Modifying Governor on G16 & G22

THANKS.. Ill give this a try!
dogpile is offline   Reply With Quote
Unread 03-11-2010, 08:13 PM   #15
Gone Wild
 
cart de golf's Avatar
 
Join Date: Nov 2007
Posts: 469
Default Re: Modifying Governor on G16 & G22

Here is a picture of my governor modified you can see # 2 the shaft is free of bracket #1
Attached Images
File Type: jpg 100_1492.jpg (64.7 KB, 580 views)
cart de golf is offline   Reply With Quote
Unread 03-12-2010, 04:55 AM   #16
Getting Wild
 
Rockboyz's Avatar
Yamaha
 
Join Date: Dec 2009
Location: Butler, PA
Posts: 106
Smile Re: Modifying Governor on G16 & G22

I decided to bypass the governor all together. After looking at the old throttle cable, found the housing to be broke in two places. I installed a new cable straight to the carb. Cleaned the carb, adjusted the pedal and cable, and excellent response. Runs like a whole new machine. also changed the oil to Mobile one Synthetic. Couldnt be happier!
Rockboyz is offline   Reply With Quote
Unread 03-12-2010, 06:40 AM   #17
Not your usual outlaw
 
essness's Avatar
Yamaha
 
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 19,931
Default Re: Modifying Governor on G16 & G22

Quote:
Originally Posted by Rockboyz View Post
I decided to bypass the governor all together. After looking at the old throttle cable, found the housing to be broke in two places. I installed a new cable straight to the carb. Cleaned the carb, adjusted the pedal and cable, and excellent response. Runs like a whole new machine. also changed the oil to Mobile one Synthetic. Couldnt be happier!
I miss my Yamaha
essness is offline   Reply With Quote
Unread 03-13-2010, 11:42 AM   #18
Not Yet Wild
Yamaha
 
Join Date: Mar 2010
Location: The Villages, FL.
Posts: 24
Smile Re: Modifying Governor on G16 & G22

Thanks to cart de golf! I performed your procedure on my 2008 Drive. My GPS registered 31 mph with standard tires & Mobil 1 oil.
carman603 is offline   Reply With Quote
Unread 03-13-2010, 12:09 PM   #19
Gone Wild
 
cart de golf's Avatar
 
Join Date: Nov 2007
Posts: 469
Default Re: Modifying Governor on G16 & G22

just remember not to keep the trottle ful open when going down hill


even if the temptation is there
cart de golf is offline   Reply With Quote
Unread 04-04-2010, 12:15 PM   #20
Not Yet Wild
 
gutterboy2ca's Avatar
Yamaha
 
Join Date: Aug 2009
Location: New Brunswick,Canada
Posts: 54
Default Re: Modifying Governor on G16 & G22

Heres a couple more pics to throw in thre thread,came out pretty clear with my Fuji,hope it helps, BTW its on a G14, should be same i assume.I also removed the Muffler,pretty much a must to get the arm off the shaft to Drill it out"all in all took about 15 mins, all stock, Garmin GPS's it at exactly 24.8mph on level ground.
Attached Images
File Type: jpg D-Head on stud.JPG (37.5 KB, 409 views)
File Type: jpg Loosen 10mm Bolt(mine was welded).JPG (43.2 KB, 395 views)
File Type: jpg Drill hole Round.JPG (40.2 KB, 398 views)
File Type: jpg Re-install arm(make sure its Loose).JPG (37.1 KB, 410 views)
gutterboy2ca is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Governor question Gas Yamaha
88 ez go governor Gas EZGO
governor Gas Club Car


All times are GMT -5. The time now is 03:31 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.